Electrical Specification
Working voltage range: 4.8-8.4V
No load speed:0.32sec/60°(4.8V), 0.22sec/60°(8.4V)
Runnig current:40mA(4.8V), 200mA(8.4V)
Peak stall torque: 32.7kg.cm(4.8V), 35.2kg.cm(8.4V)
Stall current: 2800mA±10%(4.8V), 3800mA±10%(8.4V)
Mechanical Specification
Size: 40.0*20.5*40.5mm
Weight: 56g±5%
Gear type: 5 Metal
Limit angle: 180°
Bearing: 2BB
Horn type: Plastic, POM
Case: Engineering plastics(PBT)+Aluminum alloy
Connector wire: 320mm±5mm
Motor: Carbon brush motor
Splash water resistance: yes
Control Specification
Command signal: Pulse width modification
Amplifier type: Digital controller Pulse width range: 500~2500usec
Neutral position: 1500usec
Running degree: 180°±3°(when 500~2500usec)
Dead band width: 5 usec
Rotating direction: Counterclockwise (when 1000~2000usec)
Storage Temperature Range: -30°C~80°C
Operating Temperature Range: -25°C~70°C
“DC Air Pump 12V” has been added to your cart. View cart
-10%

30kg Servo moter TD-8130MG Waterproof Price in Pakistan
₨ 5500 Original price was: ₨ 5500.₨ 5300Current price is: ₨ 5300.

MAX7219 Dot LED Matrix 4×1 Module MCU Control Unit Price in Pakistan
₨ 1300 Original price was: ₨ 1300.₨ 1200Current price is: ₨ 1200.
35KG METAL SERVO 180º TD-8135MG Price in Pakistan
₨ 6500 Original price was: ₨ 6500.₨ 5870Current price is: ₨ 5870.
Category: MOTER
Tag: METAL SERVO 180º
Description
Reviews (0)
Be the first to review “35KG METAL SERVO 180º TD-8135MG Price in Pakistan” Cancel reply
Shipping & Delivery


MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
10A 12V-40V DC Motor Speed Controller 12V 24V PWM Variable Speed Regulator
Input Voltage: DC 12V-40V
Control Power: 0.01-400W
Rated Current: 8A
Maximum Current: 10A
Static Current: 0.02A(standby status)
Frequency: 13kHz
Speed Adjustment Range: 10%-100%
Hole Diameter: 3.2mm
Operating Temperature: -20℃~125℃
Dimensions: 75*60*28mm / 2.95*2.36*1.10in
Package Weight: Approx. 73g/2.6oz
20kg Servo High Torque 180Angle TD-8120MG Waterproof Metal Gear Digital Servo Price in Pakistan
25kg Servomotor Digital TD-8125MG Price in Pakistan
28BYJ-48 5V DC Mini Stepper Motor with ULN2003 DIP IC Stepper Motor Driver Module
he module consists of a stepper motor driver plus a motor directly connectable to the module.
The use of this module is the stepper motor connection also known as step-by-step; A stepper motor is a motor that moves in discrete steps (single step). Rotation occurs thanks to a specific sequence of impulses of constant amplitude and time applied to its inputs.
5V Stepper Motor 28BYJ-48 With Drive Test Module Board ULN2003 5 Line 4 Phase
5 Line 4 phase can be driven by ordinary uln2003 chip
can also be connected in phase 2 development board used for.
supporting the use of a direct plug and easy to
use stepper motor used in the development board
65mm Smart Robot Car Tyres Wheel for Gear Motor (Yellow)
This is 65mm Robot Wheel for Smart Robo Car Motor Chassis(Yellow).
The wheel is made up of high-quality rubber which gives maximum traction while operating. The wheel is strong and sturdy as it features a nylon reinforced plastic rim.
Features:
Car hub is reinforced nylon, very sturdy.
Tire with sponge liner for more strength
With upgraded tire tread for greater friction
New design wheel for better combination with the motor
Dc 3v 6v Dc Gear Motors In Pakistan
This gear motor wheel is perfect for your next robotics project. This gearbox is ideal for robotic cars or line-tracing robots. With plastic construction and colored in bright yellow, the DC gear motor measures approx. 2.5 inches long, 0.85 inches wide, and 0.7 inches thick. The wheel can be mounted on either side and the Gearmotor works well between 4V to 7V (recommended 6 Volts). At a ratio of 1:48, you can get some really good torque at 5 Volts.
Motor Specifications
Operating voltage: 3V ~ 6V DC (recommended value 5V)
Maximum torque: 800g.cm
Speed without load: 90x10rpm
Reduction ratio: 1:48
No Load current: 190mA(max.250mA)
Stall Current: ~1A
Strong anti-interference on this motor keeps it safe around micro-controllers
FUTABA S3003 SERVO MOTOR
The Futaba S3003 Servo Motor 3.2Kg/cm Torque is a great multi-purpose standard-size high reliability servo, and it can be easily modified for continuous rotation. Features plastic gearing, so these are not suitable for high impact applications, but they’re a great choice for beginners – perfect for moving a robotic arms through a certain range or steering a rover!
We do stock metal geared, high torque servo’s for more intensive applications.
The unit comes complete with 30cm wire and 3 pin ‘S’ type female header connector that fits most receivers. This servo can rotate approximately 180 degrees (90 in each direction), but can be modified for full rotation, and comes with a range of horns and hardware to suit most applications! You can use any servo code, hardware or library to control these servos, so it’s great for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially since it will fit in small places. They work great with 16 Channel Servo Driver , and other Raspberry Pi Motor Controllers
MG995 12 kg Servo Motor in Pakistan
Operating Voltage: 4.8V – 7.2V
Torque: 10kg/cm (4.8V), 13kg/cm (6V), 15kg/cm (7.2V)
Speed: 0.20 sec/60° (4.8V), 0.16 sec/60° (6V), 0.14 sec/60° (7.2V)
Operating Temperature Range: -10°C to 50°C
Weight: 55g
Dimensions: 40.7 x 19.7 x 42.9 mm
Rotation: 360 degrees continuous
Gear Material: Metal
Bearing Type: Dual Ball Bearing
Connector Type: Universal
Compatibility: Standard servo pulse width (1,000μs to 2,000μs)
Reviews
There are no reviews yet.