Electrical Specification
Working voltage range: 4.8-8.4V
No load speed：0.32sec/60°(4.8V), 0.22sec/60°(8.4V)
Runnig current：40mA(4.8V), 200mA(8.4V)
Peak stall torque: 32.7kg.cm(4.8V), 35.2kg.cm(8.4V)
Stall current: 2800mA±10%(4.8V), 3800mA±10%(8.4V)
Mechanical Specification
Size: 40.0*20.5*40.5mm
Weight: 56g±5%
Gear type: 5 Metal
Limit angle: 180°
Bearing: 2BB
Horn type: Plastic, POM
Case: Engineering plastics(PBT)+Aluminum alloy
Connector wire: 320mm±5mm
Motor: Carbon brush motor
Splash water resistance: yes
Control Specification
Command signal: Pulse width modification
Amplifier type: Digital controller Pulse width range: 500～2500usec
Neutral position: 1500usec
Running degree: 180°±3°(when 500～2500usec)
Dead band width: 5 usec
Rotating direction: Counterclockwise (when 1000～2000usec)
Storage Temperature Range: -30°C～80°C
Operating Temperature Range: -25°C～70°C
-10%
0%
30kg Servo moter TD-8130MG Waterproof Price in Pakistan
Original price was: ₨ 5500.₨ 5300Current price is: ₨ 5300.
MAX7219 Dot LED Matrix 4×1 Module MCU Control Unit Price in Pakistan
Original price was: ₨ 1300.₨ 1200Current price is: ₨ 1200.
35KG METAL SERVO 180º TD-8135MG Price in Pakistan
Original price was: ₨ 6500.₨ 5870Current price is: ₨ 5870.
Description
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
16 Channel Servo Motor Driver Pca9685 12 Bit Pwm I2c Module For Arduino
Driver IC: PCA9685; Adjustable frequency PWM up to about 1.6 kHz; 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate; Reverse polarity protection on the terminal block input
Configurable push-pull or an open-drain output; The output enable pin to quickly disable all the outputs; Terminal block for power input; Green power-good LED
3 pin connectors in groups of 4 so you can plug in 16 servos at once; Chainable design; A spot to place a big capacitor on the V+ line220-ohm series resistors on all the output lines to protect them, and to make driving LEDs trivial.; This board/chip uses an I2C 7-bit address between 0x60-0x80, selectable with jumpers
Dimension:- Length: 62mm; Width: 25mm; Height: 15mm; Weight: 10gm
Packaged by:- Sharvi Technologies (OPC) Pvt. Ltd.; Address:- #09, CK Nagar, AECS layout, Hosa Road, Bangalore-560100
Dc 3v 6v Dc Gear Motors In Pakistan
This gear motor wheel is perfect for your next robotics project. This gearbox is ideal for robotic cars or line-tracing robots. With plastic construction and colored in bright yellow, the DC gear motor measures approx. 2.5 inches long, 0.85 inches wide, and 0.7 inches thick. The wheel can be mounted on either side and the Gearmotor works well between 4V to 7V (recommended 6 Volts). At a ratio of 1:48, you can get some really good torque at 5 Volts.
Motor Specifications
Operating voltage: 3V ~ 6V DC (recommended value 5V)
Maximum torque: 800g.cm
Speed without load: 90x10rpm
Reduction ratio: 1:48
No Load current: 190mA(max.250mA)
Stall Current: ~1A
Strong anti-interference on this motor keeps it safe around micro-controllers
MG90S Metal Gear Micro Servo Motor in Pakistan
Features:
Weight 9 grams.
Dimension: 22.2 x 11.8 x 31 mm approx
Stall torque: 1.8 kgf·cm.
Operating speed: 0.1 s/60 degree.
Operating voltage: 4.8 V (~5V)
Working Torque: 2kg/Cm Reaction Speed: 0.11 Seconds / 60 Degrees (4.8v)
Operating Temperature: 0 -55 The Deadband Setting: 5 Microseconds Plug Type: Jr, Futaba General Rotation Angle: 180 Degrees
Servo: Analog Servo Operating Voltage: 4.8v Structural Material: Copper Metal Teeth, Coreless Motor, Double Ball Bearing
Mg946r Mg946 r 180 Degree Metal Gear Servo Motor
MG946R MG946 R 180 Degree Metal Gear Servo Motor In Pakistan MG946R Digital RC Servo Motor Metal Gear Torque 13Kg for Arduino/Raspberry-Pi/Robotics. MG946R Towerpro Digital Metal Servo 13KG High torque. It is upgraded version of TowerPro MG945. The new PCB and IC control system which makes it more accurate. Its internal gearing and motor are also upgraded to improve dead bandwidth and centering. MG946R is for 1/8 buggy monster and many RC model. It is an original equipment manufacturer (OEM product) of TowerPro MG995 servo. There are many counterfeit servos of TowerPro from China dealers selling on eBay, Amazon and Alibaba websites. If the suppliers removed “TowerPro” logo from the photos and the products description, they are selling counterfeits low quality servo.
MG995 12 kg Servo Motor in Pakistan
Operating Voltage: 4.8V – 7.2V
Torque: 10kg/cm (4.8V), 13kg/cm (6V), 15kg/cm (7.2V)
Speed: 0.20 sec/60° (4.8V), 0.16 sec/60° (6V), 0.14 sec/60° (7.2V)
Operating Temperature Range: -10°C to 50°C
Weight: 55g
Dimensions: 40.7 x 19.7 x 42.9 mm
Rotation: 360 degrees continuous
Gear Material: Metal
Bearing Type: Dual Ball Bearing
Connector Type: Universal
Compatibility: Standard servo pulse width (1,000μs to 2,000μs)
Reviews
There are no reviews yet.