Electrical Specification
Working voltage range: 4.8-8.4V
No load speed：0.32sec/60°(4.8V), 0.22sec/60°(8.4V)
Runnig current：40mA(4.8V), 200mA(8.4V)
Peak stall torque: 32.7kg.cm(4.8V), 35.2kg.cm(8.4V)
Stall current: 2800mA±10%(4.8V), 3800mA±10%(8.4V)
Mechanical Specification
Size: 40.0*20.5*40.5mm
Weight: 56g±5%
Gear type: 5 Metal
Limit angle: 180°
Bearing: 2BB
Horn type: Plastic, POM
Case: Engineering plastics(PBT)+Aluminum alloy
Connector wire: 320mm±5mm
Motor: Carbon brush motor
Splash water resistance: yes
Control Specification
Command signal: Pulse width modification
Amplifier type: Digital controller Pulse width range: 500～2500usec
Neutral position: 1500usec
Running degree: 180°±3°(when 500～2500usec)
Dead band width: 5 usec
Rotating direction: Counterclockwise (when 1000～2000usec)
Storage Temperature Range: -30°C～80°C
Operating Temperature Range: -25°C～70°C
-10%
0%
30kg Servo moter TD-8130MG Waterproof Price in Pakistan
Original price was: ₨ 5500.₨ 5300Current price is: ₨ 5300.
MAX7219 Dot LED Matrix 4×1 Module MCU Control Unit Price in Pakistan
Original price was: ₨ 1300.₨ 1200Current price is: ₨ 1200.
35KG METAL SERVO 180º TD-8135MG Price in Pakistan
Original price was: ₨ 6500.₨ 5870Current price is: ₨ 5870.
Description
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
16 Channel Servo Motor Driver Pca9685 12 Bit Pwm I2c Module For Arduino
Driver IC: PCA9685; Adjustable frequency PWM up to about 1.6 kHz; 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate; Reverse polarity protection on the terminal block input
Configurable push-pull or an open-drain output; The output enable pin to quickly disable all the outputs; Terminal block for power input; Green power-good LED
3 pin connectors in groups of 4 so you can plug in 16 servos at once; Chainable design; A spot to place a big capacitor on the V+ line220-ohm series resistors on all the output lines to protect them, and to make driving LEDs trivial.; This board/chip uses an I2C 7-bit address between 0x60-0x80, selectable with jumpers
Dimension:- Length: 62mm; Width: 25mm; Height: 15mm; Weight: 10gm
Packaged by:- Sharvi Technologies (OPC) Pvt. Ltd.; Address:- #09, CK Nagar, AECS layout, Hosa Road, Bangalore-560100
65mm Smart Robot Car Tyres Wheel for Gear Motor (Yellow)
This is 65mm Robot Wheel for Smart Robo Car Motor Chassis(Yellow).
The wheel is made up of high-quality rubber which gives maximum traction while operating. The wheel is strong and sturdy as it features a nylon reinforced plastic rim.
Features:
Car hub is reinforced nylon, very sturdy.
Tire with sponge liner for more strength
With upgraded tire tread for greater friction
New design wheel for better combination with the motor
A2212 1400kv Brushless Dc Bldc Motor For Diy Rc Aircraft Multicopter
Features Of A2212 1400KV Brushless Motor For DIY RC Aircraft Multicopter:
A2212 is used when the project cost is low. 2212 is one of the cheapest and robust motors on the market. It is available in any electronic market.
A2212 is easy to work with considering many driver modules out there for the motor. With these modules, we can easily control the speed of the brushless motor.
Because of three-phase connections, we can control the speed of the motor more accurately and also more smoothly.
Efficiency is also one of the reasons for choosing this motor. This motor efficiency is good considering its purchase cost.
The lightweight design makes them suitable for a wide range of Quadcopter and Hexacopter Frames.
Suitable for RC helicopter, airplane, quadcopter, and multi-copter.
Specifications Of Drone Quadcopter A2212 Blushless DC Motor:
Model: A2212 10T
Motor KV (RPM/V): 1400
Maximum Efficiency: 80%
Current Capacity: 16A Per 60S
No-Load Current(A): 0.7A @10V
Max. Efficiency Current: 6-12A
Maximum Watts(W): 180
Internal Resistance(mΩ): 65
Poles: 14
Shaft Diameter (mm): 3.17
LiPO Batteries: 2S-3S
Length (mm): 27.5
Width (mm): 26.5
Weight (gm): 62
Package Includes:
1 x A2212-10T 1400KV Brushless Motor
1 x Prop adapter
1 x Mount
4 x Screws
Dc 3v 6v Dc Gear Motors In Pakistan
This gear motor wheel is perfect for your next robotics project. This gearbox is ideal for robotic cars or line-tracing robots. With plastic construction and colored in bright yellow, the DC gear motor measures approx. 2.5 inches long, 0.85 inches wide, and 0.7 inches thick. The wheel can be mounted on either side and the Gearmotor works well between 4V to 7V (recommended 6 Volts). At a ratio of 1:48, you can get some really good torque at 5 Volts.
Motor Specifications
Operating voltage: 3V ~ 6V DC (recommended value 5V)
Maximum torque: 800g.cm
Speed without load: 90x10rpm
Reduction ratio: 1:48
No Load current: 190mA(max.250mA)
Stall Current: ~1A
Strong anti-interference on this motor keeps it safe around micro-controllers
MG90S Metal Gear Micro Servo Motor in Pakistan
Features:
Weight 9 grams.
Dimension: 22.2 x 11.8 x 31 mm approx
Stall torque: 1.8 kgf·cm.
Operating speed: 0.1 s/60 degree.
Operating voltage: 4.8 V (~5V)
Working Torque: 2kg/Cm Reaction Speed: 0.11 Seconds / 60 Degrees (4.8v)
Operating Temperature: 0 -55 The Deadband Setting: 5 Microseconds Plug Type: Jr, Futaba General Rotation Angle: 180 Degrees
Servo: Analog Servo Operating Voltage: 4.8v Structural Material: Copper Metal Teeth, Coreless Motor, Double Ball Bearing
MG945 Servo Moter in Pakistan
MG945
MG945 Towerpro Digital Metal Servo 12KG High torque
MG945 is for 1/8 buggy monster and many RC model.
It is low cost of digital servo with export quality and great servo for just about any application.
Specification:
Weight: 55g
Dimension: 40.7×19.7×42.9mm
Stall torque: 10kg/cm (4.8v); 12kg/cm (6v)
Operating speed: 0.23sec/60degree (4.8v); 0.2sec/60degree (6.0v)
Operating voltage: 4.8 ~ 6.6v
Temperature range: 0- 55deg
Gear Type: Metal gear
Dead band width: 1us
Power Supply: Through External Adapter
servo wire length: 32cm
Current draw at idle 10MA
No load operating current draw 170MA
Stall current draw 1200MA
Servo Plug: JR (Fits JR and Futaba)
servo arms &screws included and fit with Futaba servo arm
It’s universal “S” type connector that fits most receivers, including Futaba, JR, Hitec ,GWS, Cirrus, Blue Bird, Blue Arrow, Corona, Berg, Spektrum.
CE &RoHS approved
We have upgraded our servo gear set and shaft to aluminum 6061-T6.
It is stronger and lighter than copper.
Reviews
There are no reviews yet.