Electrical Specification
Working voltage range: 4.8-8.4V
No load speed:0.32sec/60°(4.8V), 0.22sec/60°(8.4V)
Runnig current:40mA(4.8V), 200mA(8.4V)
Peak stall torque: 32.7kg.cm(4.8V), 35.2kg.cm(8.4V)
Stall current: 2800mA±10%(4.8V), 3800mA±10%(8.4V)
Mechanical Specification
Size: 40.0*20.5*40.5mm
Weight: 56g±5%
Gear type: 5 Metal
Limit angle: 180°
Bearing: 2BB
Horn type: Plastic, POM
Case: Engineering plastics(PBT)+Aluminum alloy
Connector wire: 320mm±5mm
Motor: Carbon brush motor
Splash water resistance: yes
Control Specification
Command signal: Pulse width modification
Amplifier type: Digital controller Pulse width range: 500~2500usec
Neutral position: 1500usec
Running degree: 180°±3°(when 500~2500usec)
Dead band width: 5 usec
Rotating direction: Counterclockwise (when 1000~2000usec)
Storage Temperature Range: -30°C~80°C
Operating Temperature Range: -25°C~70°C
“10A 12V-40V DC Motor Speed Controller 12V 24V PWM Variable Speed Regulator” has been added to your cart. View cart
-10%

30kg Servo moter TD-8130MG Waterproof Price in Pakistan
₨ 5500 Original price was: ₨ 5500.₨ 5300Current price is: ₨ 5300.

MAX7219 Dot LED Matrix 4×1 Module MCU Control Unit Price in Pakistan
₨ 1300 Original price was: ₨ 1300.₨ 1200Current price is: ₨ 1200.
35KG METAL SERVO 180º TD-8135MG Price in Pakistan
₨ 6500 Original price was: ₨ 6500.₨ 5870Current price is: ₨ 5870.
Category: MOTER
Tag: METAL SERVO 180º
Description
Reviews (0)
Be the first to review “35KG METAL SERVO 180º TD-8135MG Price in Pakistan” Cancel reply
Shipping & Delivery


MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
10A 12V-40V DC Motor Speed Controller 12V 24V PWM Variable Speed Regulator
Input Voltage: DC 12V-40V
Control Power: 0.01-400W
Rated Current: 8A
Maximum Current: 10A
Static Current: 0.02A(standby status)
Frequency: 13kHz
Speed Adjustment Range: 10%-100%
Hole Diameter: 3.2mm
Operating Temperature: -20℃~125℃
Dimensions: 75*60*28mm / 2.95*2.36*1.10in
Package Weight: Approx. 73g/2.6oz
16 Channel Servo Motor Driver Pca9685 12 Bit Pwm I2c Module For Arduino
Driver IC: PCA9685; Adjustable frequency PWM up to about 1.6 kHz; 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate; Reverse polarity protection on the terminal block input
Configurable push-pull or an open-drain output; The output enable pin to quickly disable all the outputs; Terminal block for power input; Green power-good LED
3 pin connectors in groups of 4 so you can plug in 16 servos at once; Chainable design; A spot to place a big capacitor on the V+ line220-ohm series resistors on all the output lines to protect them, and to make driving LEDs trivial.; This board/chip uses an I2C 7-bit address between 0x60-0x80, selectable with jumpers
Dimension:- Length: 62mm; Width: 25mm; Height: 15mm; Weight: 10gm
Packaged by:- Sharvi Technologies (OPC) Pvt. Ltd.; Address:- #09, CK Nagar, AECS layout, Hosa Road, Bangalore-560100
20kg Servo High Torque 180Angle TD-8120MG Waterproof Metal Gear Digital Servo Price in Pakistan
65mm Smart Robot Car Tyres Wheel for Gear Motor (Yellow)
This is 65mm Robot Wheel for Smart Robo Car Motor Chassis(Yellow).
The wheel is made up of high-quality rubber which gives maximum traction while operating. The wheel is strong and sturdy as it features a nylon reinforced plastic rim.
Features:
Car hub is reinforced nylon, very sturdy.
Tire with sponge liner for more strength
With upgraded tire tread for greater friction
New design wheel for better combination with the motor
Dual DC Motor Driver TB6612FNG For Arduino
FUTABA S3003 SERVO MOTOR
The Futaba S3003 Servo Motor 3.2Kg/cm Torque is a great multi-purpose standard-size high reliability servo, and it can be easily modified for continuous rotation. Features plastic gearing, so these are not suitable for high impact applications, but they’re a great choice for beginners – perfect for moving a robotic arms through a certain range or steering a rover!
We do stock metal geared, high torque servo’s for more intensive applications.
The unit comes complete with 30cm wire and 3 pin ‘S’ type female header connector that fits most receivers. This servo can rotate approximately 180 degrees (90 in each direction), but can be modified for full rotation, and comes with a range of horns and hardware to suit most applications! You can use any servo code, hardware or library to control these servos, so it’s great for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially since it will fit in small places. They work great with 16 Channel Servo Driver , and other Raspberry Pi Motor Controllers
MG945 Servo Moter in Pakistan
MG945
MG945 Towerpro Digital Metal Servo 12KG High torque
MG945 is for 1/8 buggy monster and many RC model.
It is low cost of digital servo with export quality and great servo for just about any application.
Specification:
Weight: 55g
Dimension: 40.7×19.7×42.9mm
Stall torque: 10kg/cm (4.8v); 12kg/cm (6v)
Operating speed: 0.23sec/60degree (4.8v); 0.2sec/60degree (6.0v)
Operating voltage: 4.8 ~ 6.6v
Temperature range: 0- 55deg
Gear Type: Metal gear
Dead band width: 1us
Power Supply: Through External Adapter
servo wire length: 32cm
Current draw at idle 10MA
No load operating current draw 170MA
Stall current draw 1200MA
Servo Plug: JR (Fits JR and Futaba)
servo arms &screws included and fit with Futaba servo arm
It’s universal “S” type connector that fits most receivers, including Futaba, JR, Hitec ,GWS, Cirrus, Blue Bird, Blue Arrow, Corona, Berg, Spektrum.
CE &RoHS approved
We have upgraded our servo gear set and shaft to aluminum 6061-T6.
It is stronger and lighter than copper.
Reviews
There are no reviews yet.