Electrical Specification
Working voltage range: 4.8-8.4V
No load speed:0.32sec/60°(4.8V), 0.22sec/60°(8.4V)
Runnig current:40mA(4.8V), 200mA(8.4V)
Peak stall torque: 32.7kg.cm(4.8V), 35.2kg.cm(8.4V)
Stall current: 2800mA±10%(4.8V), 3800mA±10%(8.4V)
Mechanical Specification
Size: 40.0*20.5*40.5mm
Weight: 56g±5%
Gear type: 5 Metal
Limit angle: 180°
Bearing: 2BB
Horn type: Plastic, POM
Case: Engineering plastics(PBT)+Aluminum alloy
Connector wire: 320mm±5mm
Motor: Carbon brush motor
Splash water resistance: yes
Control Specification
Command signal: Pulse width modification
Amplifier type: Digital controller Pulse width range: 500~2500usec
Neutral position: 1500usec
Running degree: 180°±3°(when 500~2500usec)
Dead band width: 5 usec
Rotating direction: Counterclockwise (when 1000~2000usec)
Storage Temperature Range: -30°C~80°C
Operating Temperature Range: -25°C~70°C
“A2212 1400kv Brushless Dc Bldc Motor For Diy Rc Aircraft Multicopter” has been added to your cart. View cart
-10%

30kg Servo moter TD-8130MG Waterproof Price in Pakistan
₨ 5500 Original price was: ₨ 5500.₨ 5300Current price is: ₨ 5300.

MAX7219 Dot LED Matrix 4×1 Module MCU Control Unit Price in Pakistan
₨ 1300 Original price was: ₨ 1300.₨ 1200Current price is: ₨ 1200.
35KG METAL SERVO 180º TD-8135MG Price in Pakistan
₨ 6500 Original price was: ₨ 6500.₨ 5870Current price is: ₨ 5870.
Category: MOTER
Tag: METAL SERVO 180º
Description
Reviews (0)
Be the first to review “35KG METAL SERVO 180º TD-8135MG Price in Pakistan” Cancel reply
Shipping & Delivery


MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
1000KV A2212 Brushless DC Motor BLDC Rotor for Quadcopter Drone
16 Channel Servo Motor Driver Pca9685 12 Bit Pwm I2c Module For Arduino
Driver IC: PCA9685; Adjustable frequency PWM up to about 1.6 kHz; 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate; Reverse polarity protection on the terminal block input
Configurable push-pull or an open-drain output; The output enable pin to quickly disable all the outputs; Terminal block for power input; Green power-good LED
3 pin connectors in groups of 4 so you can plug in 16 servos at once; Chainable design; A spot to place a big capacitor on the V+ line220-ohm series resistors on all the output lines to protect them, and to make driving LEDs trivial.; This board/chip uses an I2C 7-bit address between 0x60-0x80, selectable with jumpers
Dimension:- Length: 62mm; Width: 25mm; Height: 15mm; Weight: 10gm
Packaged by:- Sharvi Technologies (OPC) Pvt. Ltd.; Address:- #09, CK Nagar, AECS layout, Hosa Road, Bangalore-560100
28BYJ-48 5V DC Mini Stepper Motor with ULN2003 DIP IC Stepper Motor Driver Module
he module consists of a stepper motor driver plus a motor directly connectable to the module.
The use of this module is the stepper motor connection also known as step-by-step; A stepper motor is a motor that moves in discrete steps (single step). Rotation occurs thanks to a specific sequence of impulses of constant amplitude and time applied to its inputs.
5V Stepper Motor 28BYJ-48 With Drive Test Module Board ULN2003 5 Line 4 Phase
5 Line 4 phase can be driven by ordinary uln2003 chip
can also be connected in phase 2 development board used for.
supporting the use of a direct plug and easy to
use stepper motor used in the development board
Dc 3v 6v Dc Gear Motors In Pakistan
This gear motor wheel is perfect for your next robotics project. This gearbox is ideal for robotic cars or line-tracing robots. With plastic construction and colored in bright yellow, the DC gear motor measures approx. 2.5 inches long, 0.85 inches wide, and 0.7 inches thick. The wheel can be mounted on either side and the Gearmotor works well between 4V to 7V (recommended 6 Volts). At a ratio of 1:48, you can get some really good torque at 5 Volts.
Motor Specifications
Operating voltage: 3V ~ 6V DC (recommended value 5V)
Maximum torque: 800g.cm
Speed without load: 90x10rpm
Reduction ratio: 1:48
No Load current: 190mA(max.250mA)
Stall Current: ~1A
Strong anti-interference on this motor keeps it safe around micro-controllers
DC 5V-35V 5A 20khz LED PWM DC Motor Controller Speed Regulation Dimmer
DC 5V-35V 5A 20khz LED PWM DC Motor Controller Speed Regulation Dimmer
Features:
Mini DC 3-35V 5A PWM Motor Speed Controller. Wide voltage DC motor speed controller, PWM duty cycle: 1% -100%.
Mini Style DC Motor Speed Regulator controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM).
Default disconnection of short circuit point, suitable for 5-35V input.
Manually connect the short circuit point according your needs, suitable for low power 3-15v input.
By screwing the potentiometer, you can turn off power supply output. High voltage and high current resettable fuse, overcurrent automatic disconnection, power off for cooling for a few seconds fuses automatic recovery.
Precautions:
DC motor governor input is DC, can not directly connected to the AC (for example: home 220V AC), otherwise it will burn!
DC power supply positive and negative terminals do not reverse, otherwise the governor may be damaged.
The motor can be positive or negative, when the direction of operation and expectations do not match, you can adjust the line order to change the direction.
Adjust the potentiometer knob to change the governor output duty cycle, the motor speed changes.
Size: 30mm x 26mm x 14mm (Without Handle)
Package Includes:
1 x 5V-35V Speed Control Switch
DC Air Pump 12V
FUTABA S3003 SERVO MOTOR
The Futaba S3003 Servo Motor 3.2Kg/cm Torque is a great multi-purpose standard-size high reliability servo, and it can be easily modified for continuous rotation. Features plastic gearing, so these are not suitable for high impact applications, but they’re a great choice for beginners – perfect for moving a robotic arms through a certain range or steering a rover!
We do stock metal geared, high torque servo’s for more intensive applications.
The unit comes complete with 30cm wire and 3 pin ‘S’ type female header connector that fits most receivers. This servo can rotate approximately 180 degrees (90 in each direction), but can be modified for full rotation, and comes with a range of horns and hardware to suit most applications! You can use any servo code, hardware or library to control these servos, so it’s great for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially since it will fit in small places. They work great with 16 Channel Servo Driver , and other Raspberry Pi Motor Controllers
MG90S Metal Gear Micro Servo Motor in Pakistan
Features:
Weight 9 grams.
Dimension: 22.2 x 11.8 x 31 mm approx
Stall torque: 1.8 kgf·cm.
Operating speed: 0.1 s/60 degree.
Operating voltage: 4.8 V (~5V)
Working Torque: 2kg/Cm Reaction Speed: 0.11 Seconds / 60 Degrees (4.8v)
Operating Temperature: 0 -55 The Deadband Setting: 5 Microseconds Plug Type: Jr, Futaba General Rotation Angle: 180 Degrees
Servo: Analog Servo Operating Voltage: 4.8v Structural Material: Copper Metal Teeth, Coreless Motor, Double Ball Bearing
Reviews
There are no reviews yet.