-4%
PIC18F4620 Microcontroller Price in Pakistan
Original price was: ₨ 3000.₨ 2500Current price is: ₨ 2500.
PIC18F452 40 Pin Pic Microcontroller DIP price in pakistan
Original price was: ₨ 2250.₨ 2200Current price is: ₨ 2200.
PIC18F4550 Microcontroller Price in Pakistan
Original price was: ₨ 3000.₨ 2890Current price is: ₨ 2890.
Reviews (0)
Shipping & Delivery
Related products
Atmega32 Atmega32a Atmega 32 Price in Pakistan
Operating Voltage: 4.5V to 5V
Advanced RISC Architecture.
32 x 8 General Purpose Working Registers.
Fully Static Operation.
Up to 16 MIPS Throughput at 16 MHz.
On-chip 2-cycle Multiplier.
High Endurance Non-volatile Memory segments.
32 Kbytes of In-System Self-programmable Flash program memory.
1024 Bytes EEPROM.
2 Kbyte Internal SRAM.
Write/Erase Cycles: 10,000 Flash/100,000 EEPROM.
Data retention: 20 years at 85°C/100 years at 25°C(1).
Optional Boot Code Section with Independent Lock Bits.
In-System Programming by On-chip Boot Program.
True Read-While-Write Operation.
Programming Lock for Software Security.
Extensive On-chip Debug Support.
8 Single-ended Channels.
Byte-oriented Two-wire Serial Interface.
Programmable Serial USART.
Master/Slave SPI Serial Interface.
Programmable Watchdog Timer with Separate On-chip Oscillator.
CH341A 24 25 Series EEPROM Flash BIOS USB Programmer Price in Pakistan
The Programmer Features
By special USB chip CH341A production. USB1.1 communication. Burning speed than ordinary ATMEGA8 25
Series of programming 2-3 times faster.
Erase the Burning Check Speed about 2-3 mbit per minute.
Very suitable for amateur burning
24 and 25 series of FLASH.
Support All versions of Microsoft Windows 7, 8, 10 etc & Linux & Mac OS
Uses the USB port power supply
For SPI & IIC Chip Programming (24 & 25 Series)
Put the Programmer in Computer USB port
Open the “CH341A programmer software” the burning software.
Choose Chip Capacity if using 24 Series, Click Detect for auto Detection of Chip of 25 Series
Can Burn Write, Erase & Backup Chips
For Serial TTL Programming
Set the Jumper
Put the Programmer computer USB port,
Programmer has Serial Pinouts of RX, TX & GND
Connect RX Pin to TX Pin & TX pin to RX Pin & GND to GND
Choose corresponding COM port,
Open the Corresponding Download Software Platform for example (PUTTY for Serial Terminal Emulator)
Reviews
There are no reviews yet.