Floating channel designed for bootstrap operation
Fully operational to +600V
Tolerant to negative transient voltage
dV/dt immune
Gate drive supply ranges from 10 to 20V
Undervoltage lockout
3.3V, 5V, and 15V input logic compatible
Cross-conduction prevention logic
Internally set deadtime
High-side output in phase with the input
Shut down input turns off both channels
Matched propagation delay for both channels
-10%
IR2103 IC DIP8
Original price was: ₨ 370.₨ 240Current price is: ₨ 240.
IR2104 IC SMD IR2104S SOP8 Driver
Original price was: ₨ 300.₨ 275Current price is: ₨ 275.
IR2104 Half Bridge Gate Driver IC DIP-8
Original price was: ₨ 335.₨ 300Current price is: ₨ 300.
The IR2104 IC is a high-speed Half-Bridge gate driver chip that accepts low-power input to output high-power current drives. It can be used to drive high-power switching devices like MOSFETs and IGBTs and both high- and low-side MOSFETs. The IR2104 IC has a typical source current of 0.21A and a sink current of 0.36A. The logic input is compatible with standard CMOS or LSTTL output, down to 3.3V logic.
The IR2104S SOP IC-8 Gate Driver is a high voltage, high-speed power MOSFET and IGBT driver with dependent high and low side referenced output channels. Proprietary HVIC and latch-immune CMOS technologies enable ruggedized monolithic construction. The logic input is compatible with standard CMOS or LSTTL output, down to 3.3V logic.
The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. The floating channel can be used to drive an N-channel power MOSFET or IGBT in the high-side configuration which operates from 10 to 600 volts.
Description
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
A3120 IC HCPL3120 DIP
2.0 A Minimum Peak Output Current
15 kV/µs Minimum Common Mode Rejection (CMR) at VCM = 1500 V
0.5 V Maximum Low-Level Output Voltage (VOL) Eliminates the Need for a Negative Gate Drive
ICC = 5 mA Maximum Supply Current
Under Voltage Lock-Out Protection (UVLO) with Hysteresis
Wide Operating VCC Range: 15 to 30 Volts
500 ns Maximum Switching Speeds
Industrial Temperature Range : -40°C to 100°C
ADC0804 Converter 8-Bit Analog to Digital
ADC0804 Converter 8-Bit Analog to Digital Features
0V to 5V analog input voltage range with a single 5V supply
Compatible with microcontrollers, access time is 135 ns
Easy interface to all microprocessors
Logic inputs and outputs meet both MOS and TTL voltage level specifications
Works with 2.5V (LM336) voltage reference
On-chip clock generator
No zero adjust required
0.3[Prime] standard width 20-pin DIP package
Operates ratio metrically or with 5 VDC, 2.5 VDC, or analog span-adjusted voltage reference
Differential analog voltage inputs
Atmega32 Atmega32a Atmega 32
Operating Voltage: 4.5V to 5V
Advanced RISC Architecture.
32 x 8 General Purpose Working Registers.
Fully Static Operation.
Up to 16 MIPS Throughput at 16 MHz.
On-chip 2-cycle Multiplier.
High Endurance Non-volatile Memory segments.
32 Kbytes of In-System Self-programmable Flash program memory.
1024 Bytes EEPROM.
2 Kbyte Internal SRAM.
Write/Erase Cycles: 10,000 Flash/100,000 EEPROM.
Data retention: 20 years at 85°C/100 years at 25°C(1).
Optional Boot Code Section with Independent Lock Bits.
In-System Programming by On-chip Boot Program.
True Read-While-Write Operation.
Programming Lock for Software Security.
Extensive On-chip Debug Support.
8 Single-ended Channels.
Byte-oriented Two-wire Serial Interface.
Programmable Serial USART.
Master/Slave SPI Serial Interface.
Programmable Watchdog Timer with Separate On-chip Oscillator.
NOR Gate IC 74LS02 Quad 2-input
Operating voltage range: +4.75 to +5.25V
Maximum supply voltage: 7V
Maximum current allowed to draw through each gate output: 8mA
TTL outputs
Low power consumption
Maximum ESD: 3.5KV
Typical Rise Time: 15ns
Typical Fall Time: 15ns
Operating temperature :0°C to 70°C
Storage Temperature: -65°C to 150°C
Operating temperature: 0°C to 75°C
Pin Number Description
NORGATE 1
2 1A-INPUT1 of GATE 1
3 1B-INPUT2 of GATE 1
1 1Y-OUTPUT of GATE1
NORGATE 2
5 2A-INPUT1 of GATE 2
6 2B-INPUT2 of GATE 2
4 2Y-OUTPUT of GATE2
NORGATE 3
8 3A-INPUT1 of GATE 3
9 3B-INPUT2 of GATE 3
10 3Y-OUTPUT of GATE3
NORGATE 4
11 4A-INPUT1 of GATE 4
12 4B-INPUT2 of GATE 4
13 4Y-OUTPUT of GATE4
SHARED TERMINALS
7 GND- Connected to ground
14 VCC-Connected to positive voltage to provide power to all four gates
SKU: 0401 Categories: Discrete Electronic Components, ICs, Logic Gates Tags: 2input, 74LS02, Gate, IC, NOR, quad
Original Atmega328 28 Pin Atmega328p-pu Microcontroller
Specifications of Atmel 8 Bit 28 Pins Microcontroller ATMEGA328P Microchip:
4.5V-5.5V operating range
Up to 20MHz
Part: ATMEGA328P-AU
32kB Flash program memory
1kB EEPROM
2kB Internal SRAM
Two8-bit Timer/Counters
One16-bit Timer/Counter
RTC with separate oscillator
6 PWM Channels
8 Channel 10-bit ADC
Serial USART
Master/Slave SPI interface
2-wire (I2C) interface
Watchdog timer
Analog comparator
23 IO lines
Data retention: 20 years at 85oC/ 100 years at 25oC
Reviews
There are no reviews yet.