Atmel ATMEGA328P 8 Bit 28 Pins Microcontroller is a high-performance, low-power controller from a ​​​​​​microchip. Atmel ATMEGA328P Arduino is like the ATmega168, with double the flash space. 32K of program space. 23 I/O lines, 6 of which are channels for the 10-bit ADC. Runs up to 20MHz with an external crystal. The package can be Arduino programmed in a circuit. 1.8V to 5V operating voltage. Atmega328p programming controller is an 8-bit microcontroller based on AVR RISC architecture. Atmega-328p ic chip is the most popular of all AVR controllers as it is used in ARDUINO boards.
Features of Atmel ATMEGA328P 8 Bit 28 Pins Microcontroller 28-DIP Atmega-328P Arduino Programming Controller IC Chip Micro Chip:
Practically does the work for you, durable and useful.
Good reliability and lifelong lasting time are useful and durable.
Only an ATmega328 in the DIP package, without the optiboot bootloader pre-loaded.
You have to use code in your custom embedded project.
It’s like the ATmega168, with double the flash space.
32K of program space. 23 I/O lines, 6 of which are channels for the 10-bit ADC.
Runs up to 20MHz with an external crystal.
The package can be programmed in a circuit. 1.8V to 5V operating voltage!
To get this chip working with IDE, you will need an external 16MHz crystal or resonator, a 5V supply, and a serial connection.
Specifications of Atmel 8 Bit 28 Pins Microcontroller ATMEGA328P Microchip:
4.5V-5.5V operating range
Up to 20MHz
Part: ATMEGA328P-AU
32kB Flash program memory
1kB EEPROM
2kB Internal SRAM
Two8-bit Timer/Counters
One16-bit Timer/Counter
RTC with separate oscillator
6 PWM Channels
8 Channel 10-bit ADC
Serial USART
Master/Slave SPI interface
2-wire (I2C) interface
Watchdog timer
Analog comparator
23 IO lines
Data retention: 20 years at 85oC/ 100 years at 25oC
Reviews
There are no reviews yet.