The FC-65 12V 30-AMP Relay Module is a 1-channel relay module that can use to control high-current devices from a low-voltage microcontroller. 12V Relay 30A has a 5V operating voltage and can switch a maximum load of 30A at 250V AC or 30V DC.

This 1 Channel 12v Relay SLA-12VDC-SL-C 30A 250V Relay Module is a convenient board that can use to control high voltage, high current loads such as motor, solenoid valves, lamps, and AC load, this single-channel 5V 30A Relay Module board with LED indicators can be controlled by microcontrollers such as Arduino, AVR, PIC, ARM any other microcontroller operating at 5V.

The 1-Channel is optically isolated relay module, which means that there is no electrical connection between the input and output circuits. This helps to prevent damage to the microcontroller in the event of a short circuit or other electrical fault.

The 30a 12v FC-65 relay module has a 5V operating voltage. This means that the input signal and the output load must be within the 5V range. The input signal can be either a high level (5V) or a low level (0V). The output load can connect to any device that requires a 250V AC or 30V DC current.

The SLA-12VDC-SL-C FC-65 relay module works on the principle of an electromagnet. The electromagnet is activated by a low-voltage signal from a microcontroller. When the electromagnet is activated, it pulls a switch, which closes the circuit between the output terminals. This allows current to flow through the output load.

The FC-65 12V 30A relay module has two LEDs: a green power LED and a red relay status LED. The green LED indicates that the module is power on, and the red LED indicates that the relay activated.

Features : –
The FC-65 12V 30A relay module is a versatile and easy-to-use device that can use in a variety of applications. 12V 30 AMP Relay module is a popular choice for hobbyists and DIY enthusiasts, as well as for professional engineers and technicians. It is a reliable and affordable way to control high-current devices from a low-voltage microcontroller. The FC-65 relay module has a number of benefits, including:

High current capacity
Optical isolation
Small size and easy to use
Low cost
Safety
Reliability
Durability
FC-65 12V 30-AMP 1-Channel Relay Module Specifications : –
The 12V 30 AMP Relay Module is a simple and reliable device that can be used to control high-current devices from a low-voltage microcontroller. The SLA-12VDC-SL-C module has two terminals for the input signal and two terminals for the output load. The input signal can be either a high level (5V) or a low level (0V). The output load can connect to any device that requires a 250V AC or 30V DC current. The FC-65 relay module has the following specifications:

Operating voltage: 5V DC
Maximum load: 30A (250V AC or 30V DC)
Trigger current: 2-4mA
Input signal: high level (5V) or low level (0V)
Output signal: Normally open (NO) or Normally closed (NC)
Size: 50mm x 33mm x 24mm
Weight: 15g
FC-65 12V 30-AMP 1-Channel Relay Module Applications : –
The FC-65 SLA-12VDC-SL-C relay module can use to control motors and lights. The FC-65 relay module can use to switch on and off electrical appliances such as lights, fans, and heaters. This can useful for automating home and office tasks, or for controlling devices in a security system.

The maximum load of 30A (250V AC or 30V DC) means that the module can switch a current of up to 30A at 250V AC or 30V DC. The output load must not exceed this current rating. The output signal is Normally open (NO) or Normally closed (NC). A NO output signal will turn on the output load when the relay is activated, while a NC output signal will turn off the output load when the relay is activated. The 12v 30a SLA-12VDC-SL-C relay module can use in a variety of applications, including:

Switching on and off electrical appliances
Controlling motors and lights
Monitoring and controlling industrial processes
Automating home and office tasks
Security and safety applications
Scientific and research applications
FC-65 12V 30-AMP 1-Channel Relay Module Pin Description : –
The 30a 12v relay module is optically isolated, which means that there is no electrical connection between the input and output circuits. This helps to prevent damage to the microcontroller in the event of a short circuit or other electrical fault.

The FC-65 30A Relay 12V module also has two LEDs: a green power LED and a red relay status LED. The green LED indicates that the module is power on, and the red LED indicates that the relay activated. The FC-65 12V 30-AMP 1-Channel Relay Module SLA-12VDC-SL-C has 6 pins, as follows:

DC+: This pin is the positive power supply pin. It should connect to a 5V DC source.
DC-: This pin is the negative power supply pin. It should connect to the ground.
IN: This pin is the input signal pin. It can connect to a microcontroller or other device that will generate the signal to activate the relay.
COM: This pin is the common pin of the relay. It is connect to the output load.
NO: This pin is the normally open pin of the relay. When the relay activated, this pin will connect to the COM pin.
NC: This pin is the normally closed pin of the relay. When the relay activated, this pin will disconnect from the COM pin.
Datasheet:-
images.100y.com.tw/…/29-SLA-12VDC-SL-C.pdf

Package: –
1 x FC-65 12V 30-AMP 1-Channel Relay Module