The AM26LS32Ax and AM26LS33Ax devices are quadruple differential line receivers for balanced and unbalanced digital data transmission. The enable function is common to all four receivers and offers a choice of active-high or active-low input. The 3-state outputs permit connection directly to a bus-organized system. Fail-safe design ensures that, if the inputs are open, the outputs always are high. Compared to the AM26LS32 and the AM26LS33, the AM26LS32A and AM26LS33A incorporate an additional stage of amplification to improve sensitivity. The input impedance has been increased, resulting in less loading of the bus line. The additional stage has increased propagation delay; however, this does not affect interchangeability in most applications. The AM26LS32AC and AM26LS33AC are characterized for operation from 0°C to 70°C. The
Features 1
• AM26LS32A Devices Meet or Exceed the Requirements of ANSI TIA/EIA-422-B, TIA/EIA- 423-B, and ITU Recommendations V.10 and V.11
• AM26LS32A Devices Have ±7-V Common-Mode Range With ±200-mV Sensitivity
• AM26LS33A Devices Have ±15-V Common-Mode Range With ±500-mV Sensitivity
• Input Hysteresis 50 mV Typical
•Operate From a Single 5-V Supply
• Low-Power Schottky Circuitry
• 3-State Outputs
• Complementary Output-Enable Inputs
• Input Impedance 12 kΩ Minimum
• Open Input Fail-Safe
“HCPL-3120 – (A3120) SMD-8 LOGIC OUTPUT OPTOCOUPLER” has been added to your cart. View cart
-20%

26LS31 QUADRUPLE DIFFERENTIAL LINE DRIVER SMD IC
₨ 300 Original price was: ₨ 300.₨ 230Current price is: ₨ 230.

27C512-120 DIP-28W EPROM 512kbit NEW
₨ 950 Original price was: ₨ 950.₨ 825Current price is: ₨ 825.
26ls32 DIP 26ls32 Quadruple Differential Line Receiver
₨ 250 Original price was: ₨ 250.₨ 200Current price is: ₨ 200.
Category: IC,S
Description
Reviews (0)
Be the first to review “26ls32 DIP 26ls32 Quadruple Differential Line Receiver” Cancel reply
Shipping & Delivery


MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
18F452 PIC18F452 40 Pin Pic Microcontroller DIP Online In Pakistan – Best Prices
7414 74ls14 Schmitt Trigger Hex Inverter Ic In Pakistan
The 74LS14 Schmitt Trigger Hex Inverter IC is widely used in the following applications:
Noise Removal: Cleans up noisy signals in circuits, ensuring reliable digital operation.
Signal Conditioning: Used to sharpen slow input signals, making them suitable for digital logic systems.
Power Meters and Power Analyzers: In power measurement devices, the Schmitt trigger helps in ensuring stable, noise-free signal processing.
Signal Converters: Converts slow or noisy analog signals into clean digital signals.
Digital Systems: Used in systems requiring high noise immunity and stable, clean logic transitions.
Package Includes:
1 x 74LS14 Schmitt Trigger Hex Inverter IC (DIP-14)
Buy 74LS14 Schmitt Trigger Hex Inverter IC in Pakistan
G
7448 Bcd To 7 Segment Decoder Driver Ic 74ls48 Sn74ls48n 74hc48
74LS08 – Quadruple Two Input AND Gate
AD633JN Four-Quadrant Analog Multiplier DIP-8
Atmega8l Atmega8 28pin Microcontroller
The ATMega8 Microcontroller AVR core combines a rich instruction set with 32 general-purpose working registers. All 32 registers are directly connected to the Arithmetic Logic Unit (ALU), allowing two independent registers to be accessed in one single instruction executed in one clock cycle. The resulting architecture is more code efficient while achieving throughputs up to ten times faster than conventional CISC microcontrollers.
The ATmega8 provides the following features: 8 Kbytes of In-System Programmable Flash with Read-While-Write capabilities, 512 bytes of EEPROM, 1 Kbyte of SRAM, 23 general purpose I/O lines, 32 general purpose working registers, three flexible Timer/Counters with compare modes, internal and external interrupts, a serial programmable USART, a byte-oriented Twowire Serial Interface, a 6-channel ADC (eight channels in TQFP and QFN/MLF packages) with 10-bit accuracy, a programmable Watchdog Timer with Internal Oscillator, an SPI serial port, and five software selectable power saving modes. The Idle mode stops the CPU while allowing the SRAM, Timer/Counters, SPI port, and interrupt system to continue functioning.
HCPL-3120 – (A3120) SMD-8 LOGIC OUTPUT OPTOCOUPLER
NOR Gate IC 74LS02 Quad 2-input
Operating voltage range: +4.75 to +5.25V
Maximum supply voltage: 7V
Maximum current allowed to draw through each gate output: 8mA
TTL outputs
Low power consumption
Maximum ESD: 3.5KV
Typical Rise Time: 15ns
Typical Fall Time: 15ns
Operating temperature :0°C to 70°C
Storage Temperature: -65°C to 150°C
Operating temperature: 0°C to 75°C
Pin Number Description
NORGATE 1
2 1A-INPUT1 of GATE 1
3 1B-INPUT2 of GATE 1
1 1Y-OUTPUT of GATE1
NORGATE 2
5 2A-INPUT1 of GATE 2
6 2B-INPUT2 of GATE 2
4 2Y-OUTPUT of GATE2
NORGATE 3
8 3A-INPUT1 of GATE 3
9 3B-INPUT2 of GATE 3
10 3Y-OUTPUT of GATE3
NORGATE 4
11 4A-INPUT1 of GATE 4
12 4B-INPUT2 of GATE 4
13 4Y-OUTPUT of GATE4
SHARED TERMINALS
7 GND- Connected to ground
14 VCC-Connected to positive voltage to provide power to all four gates
SKU: 0401 Categories: Discrete Electronic Components, ICs, Logic Gates Tags: 2input, 74LS02, Gate, IC, NOR, quad
Reviews
There are no reviews yet.