-9%
360 product view
    Click to enlarge
    CJMCU-1232 ADS1232 24 Bit Analog-to-Digital Converter Board Original price was: ₨ 2750.Current price is: ₨ 2500.
    Back to products
    Active Buzzer Module Low Level Trigger for Arduino/Raspberry Pi Original price was: ₨ 150.Current price is: ₨ 120.

    TDS Meter V1.0 Module Water Quality Sensor for Arduino

    Original price was: ₨ 2200.Current price is: ₨ 2000.

    Technical Parameters
    TDS Meter:
    Input Voltage: DC 3.3 ~ 5.5V
    Output Voltage: 0 ~ 2.3V
    Working Current: 3 ~ 6mA
    TDS Measurement Range: 0 ~ 1000ppm
    TDS Measurement Accuracy: ± 10% F.S. (25 ℃)
    Module Interface: XH2.54-3P
    Electrode Interface: XH2.54-2P

    Compare
    Add to wishlist
    Category:
    Description

    TDS Meter V1.0 Module Water Quality Sensor for Arduino
    TDS sensor kit is compatible with Arduino controllers, plug and play, easy to use.
    It can be applied to measure TDS value of the water, to reflect the cleanliness of the water.
    TDS (Total Dissolved Solids) indicates that how many milligrams of soluble solids dissolved in one liter of water. In general, the higher the TDS value, the more soluble solids dissolved in water, and the less clean the water is.
    Therefore, the TDS value can be used as one of the references for reflecting the cleanliness of water
    Measuring the TDS value in the water is to measure the total amount of various organic or inorganic substances dissolved in water, in the unit of ppm or milligrams per liter (mg/l).

    Technical Parameters
    TDS Meter:
    Input Voltage: DC 3.3 ~ 5.5V
    Output Voltage: 0 ~ 2.3V
    Working Current: 3 ~ 6mA
    TDS Measurement Range: 0 ~ 1000ppm
    TDS Measurement Accuracy: ± 10% F.S. (25 ℃)
    Module Interface: XH2.54-3P
    Electrode Interface: XH2.54-2P

    TDS Probe:
    Number of Needle: 2
    Total Length: 60cm
    Connection Interface: XH2.54-2P
    Color: White
    Other: Waterproof Probe

    Shipping List
    TDS Meter V1.0 for Arduino x1
    Waterproof TDS Probe x1
    XH2.54-3Pin Jumper Wire x1

    Reviews (0)

    Reviews

    There are no reviews yet.

    Be the first to review “TDS Meter V1.0 Module Water Quality Sensor for Arduino”

    Your email address will not be published. Required fields are marked *

    Shipping & Delivery
    wd-ship-1
    wd-ship-2

    MAECENAS IACULIS

    Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

    ADIPISCING CONVALLIS BULUM

    • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
    • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
    • Diam parturient dictumst parturient scelerisque nibh lectus.

    Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

    Related products

    -24%
    Compare

    Arduino Due Price in Pakistan

    ,
    Original price was: ₨ 8500.Current price is: ₨ 6500.
    This Arduino Due microcontroller is based on the board of Atmel SAM3X8E ARM CortexM3 CPU. This Arduino due board is based on 32 bit ARM core microcontroller. Atmel SAM3X8E Arduino board contains 54 digital input/ output pins, 12 analog inputs, 4 UARTs, an 84 Mhz clock, an USB OTG capable connection, 2 DAC and DAC stands for Digital to Analog Converter, 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button. Arduino board contains everything needed to support the microcontroller. We just need to connect the micro USB of Arduino Due to the computer. And this cable is included in the product pack. We just need to power it with an AC to DC adapter or battery to get started. This Arduino Due is compatible with all Arduino shields. And that works at 3.3V. these are compliant with 1.0 Arduino pinout. we provide high 6 inches micro USB cable with high-quality connection Arduino Due
    Add to wishlist
    Add to cart
    Quick view
    -14%
    Compare

    Arduino Leonardo In Pakistan Atmega32u Based Development Board

    ,
    Original price was: ₨ 1850.Current price is: ₨ 1600.
    The Arduino Leonardo is a micro-controller board base on the ATmega32u4 (datasheet). It has 20 digital input/output pins (of which
    Add to wishlist
    Add to cart
    Quick view
    -8%
    Compare

    Arduino Mega 2560 R3 In Pakistan

    ,
    Original price was: ₨ 4300.Current price is: ₨ 3950.
    The Arduino Mega 2560 is a microcontroller board based on the ATmega2560 (datasheet). It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Uno, Duemilanove or Diecimila.
    Add to wishlist
    Add to cart
    Quick view
    -16%
    Compare

    MAX6675 Module + K Type Thermocouple

    Original price was: ₨ 950.Current price is: ₨ 800.
    This temperature sensor and module makes use of the Maxim MAX6675 K-Thermocouple to digital converter IC to provide a microcontroller compatible digital serial interface (SPI compatible) to provide accurate temperature compensated measurement of the supplied K-Type thermocouple sensor. This sensor is available at electronicstore.pk shop online in Pakistan.
    Add to wishlist
    Add to cart
    Quick view
    -13%
    Compare

    MQ-6 LPG/Butane Gas Sensor Module

    Original price was: ₨ 400.Current price is: ₨ 350.
    MQ-6 LPG/Butane Gas Sensor Module MQ-6 LPG/Butane Gas Sensor Module gas sensor detects the concentrations of LPG, isobutane, and propane in the air and ouputs its reading. Buy online in Pakistan.
    Add to wishlist
    Add to cart
    Quick view
    -13%
    Compare

    MQ-7 Carbon Mono Oxide Gas Sensor Module

    Original price was: ₨ 400.Current price is: ₨ 350.
    Sensitive material of MQ-7 gas sensor is SnO2, which with lower conductivity in clean air. It make detection by method of cycle high and low temperature, and detect CO when low temperature (heated by 1.5V). Electronicstor.pk
    Add to wishlist
    Add to cart
    Quick view
    -14%
    Compare

    Mq8 Hydrogen Gas Sensor Module In Pakistan

    Original price was: ₨ 350.Current price is: ₨ 300.
    MQ8 MQ 8 MQ-8 Hydrogen Gas Sensor Module H2 Alarm Detection MQ-8 Sensor Hydrogen Gas Sensor Module H2 Alarm Detection use in clean air low conductivity tin oxide (SnO2). When there is the environment in which the combustible gas sensor, conductivity sensor with increasing concentration of combustible gases in air increases. Using a simple circuit to convert the change in conductivity of the gas concentration corresponding to the output signal. MQ-8 hydrogen gas sensor of high sensitivity, the monitoring of the other hydrogen-containing gas is also very satisfactory. This sensor can detect a wide range of hydrogen gas, city gas, in particular, is a low-cost sensor for a variety of applications.
    Add to wishlist
    Add to cart
    Quick view
    -9%
    Compare

    sp32-cam Wifi + Bluetooth Camera Module Development Board Esp32 With Camera Module Ov2640 For Arduino

    ,
    Original price was: ₨ 1680.Current price is: ₨ 1530.
    SP32-CAM is a WIFI+ Bluetooth dual-mode development board that uses PCB on-board antennas and cores based on ESP32 chips. It can work independently as a minimum system.ESP integrates WiFi, traditional Bluetooth, and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture, main frequency adjustment range 80MHz to 240MHz, on-chip sensor, Hall sensor, temperature sensor, etc. Fully compliant with WiFi 802.11b/g/n/e/i and Bluetooth 4.2 standards, it can be used as a master mode to build an independent network controller, or as a slave to other hosts MCUs to add networking capabilities to existing devices.ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals, and other IoT applications. It is an ideal solution for IoT applications. Features: Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module Low-power dual-core 32-bit CPU for application processors Up to 240MHz, up to 600 DMIPS Built-in 520 KB SRAM, external 4M PSRAM Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC Support OV2640 and OV7670 cameras with built-in flash Support for images WiFI upload Support TF card Support multiple sleep modes Embedded Lwip and FreeRTOS Support STA/AP/STA+AP working mode Support Smart Config/AirKiss One-click distribution network Support for serial local upgrade and remote firmware upgrade (FOTA) Support secondary development
    Add to wishlist
    Add to cart
    Quick view