MAX6675 module is a 12-bit resolution serial thermocouple analog-to-digital converter, internal integrated cold junction compensation circuit, linearity correction, and thermocouple break detection.
Simple SPI serial port temperature value output, its temperature resolution capability is 0. 25 Degree, cold junction compensation range -20℃～ 85℃, wide operating voltage range DC3~5V.
Combining the module and the IO port of the MCU via Dupont cables, the temperature value of the K-type thermocouple can be directly read using the SPI protocol.
Module interface: GND VCC SCK CS SO; Set screw M6.
Features:
Simple SPI serial port temperature value output
On-chip cold junction compensation
High impedance differential input
Thermocouple disconnection detection
With a fixed mounting holes for easy fixed installation, set
screw M6
Working voltage range is 3.0~5.5V, operating current 50mA
The operating temperature range of -20℃~ 85℃
The temperature measurement accuracy: ± 1.5 °C
Module Interface: GND VCC SCK CS SO
Supply voltage: 3~5V DC
-10%
0%
Thermocouple K-type Thread M8 Screw Probe 2 Meter Shield Wire Price in Pakistan
Original price was: ₨ 750.₨ 550Current price is: ₨ 550.
1uF 50V 1206 (3216M) Multilayer Ceramic Capacitor MLCC - SMD/SMT
Original price was: ₨ 15.₨ 12Current price is: ₨ 12.
Max6675 k Type Thermocouple Temperature Sensor Converter For Arduino Spi Interface Module Hw551
Original price was: ₨ 700.₨ 630Current price is: ₨ 630.
MAX6675 Module Specifications:
Thermocouple temperature range: 0 to 450oC
Module sensor temperature range (oC): 0 to 1024
Temperature resolution (oc): 0.25
Module supply voltage: 3 to 5.5V
Module current: 50mA
Module interface: Serial (SO, SCK, CS) 16-bit SPI compatible.
Thermocouple accuracy (0-700oC): 8 LSBs
Thermocouple disconnect detection.
Description
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Ch340 Arduino Mega 2560 With Cable In Pakistan
The Mega 2560 is a micro-controller board base on the CH340. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything need to support the micro-controller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get start. The Mega is compatible with most shields design for the Duemilanove or Diecimila.
The Mega 2560 is an update to the Mega, which it replaces. The Mega2560 differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the CH340 programmed as a USB-to-serial converter.
Revision 2 of the Mega2560 board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU mode.
Mq4 High Sensitivity Gas Methane (cng) Detector Sensor Module
MQ4 High Sensitivity Gas Methane (CNG) Detector Sensor Module is a simple to use MQ-4 High Sensitivity Gas Methane (CNG) Detector Sensor Module which can sense the presence of Compressed Natural Gas(CNG), methane(CH4), etc in the air. The module uses our MQ-4 sensor. It simplifies the interface to the odd pin spacing of the sensor and provides the interface through standard 4 x 0.1″ header pins. It provides an analog output corresponding to the concentration of the gases in the air and an easy to use digital output. The onboard potentiometer can be used to set the maximum gas concentration beyond which the digital output gets triggered. Just power the module with 5V set the threshold and you can start getting the gas concentration of the air around the sensor! An onboard LED signals the presence of any gas.
sp32-cam Wifi + Bluetooth Camera Module Development Board Esp32 With Camera Module Ov2640 For Arduino
SP32-CAM is a WIFI+ Bluetooth dual-mode development board that uses PCB on-board antennas and cores based on ESP32 chips. It can work independently as a minimum system.ESP integrates WiFi, traditional Bluetooth, and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture, main frequency adjustment range 80MHz to 240MHz, on-chip sensor, Hall sensor, temperature sensor, etc. Fully compliant with WiFi 802.11b/g/n/e/i and Bluetooth 4.2 standards, it can be used as a master mode to build an independent network controller, or as a slave to other hosts MCUs to add networking capabilities to existing devices.ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals, and other IoT applications. It is an ideal solution for IoT applications.
Features:
Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
Low-power dual-core 32-bit CPU for application processors
Up to 240MHz, up to 600 DMIPS
Built-in 520 KB SRAM, external 4M PSRAM
Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
Support OV2640 and OV7670 cameras with built-in flash
Support for images WiFI upload
Support TF card
Support multiple sleep modes
Embedded Lwip and FreeRTOS
Support STA/AP/STA+AP working mode
Support Smart Config/AirKiss One-click distribution network
Support for serial local upgrade and remote firmware upgrade (FOTA)
Support secondary development
WROOM ESP32 Wifi Microcontroller Development
ESP32 is a prototyping board that is the work of the Shanghai-based company Espressif Systems. It incorporates the ESP32, a microprocessor tailored toward wearable electronics and IoT. It boasts integrated Wi-Fi and Bluetooth, along with an array of inbuilt antenna switches, and ultra-low power consumption. The company released the ESP8266 chip in 2014. Costing only a few dollars, this small chip is able to bridge an Arduino with a WiFi network, solving many issues that early IoT pioneers experienced.
1
Add to cart
Add to wishlist
Compare Tags: ESP esp32 ESP8266 nodemcu nodemuc wifi bluetooth wifi development board
Reviews
There are no reviews yet.