Applications
Car , laptop power supply : Run Laptop on DC24V Car battery . (Laptops usually require 17V – 18V DC.)
Run Communication equipment on 24V battery
Run Low voltage (12V – 18V) DC motors used in Robots on 24V or 36V batteries
Step down battery charger : Because of CC and CV adjustments module can be used as battery charger
Solar battery charger
Pre-supply voltage regulator for Lab Power Supply
Constant Current LED Lighting Power Supply
Technical Specifications
Material: PCB board and electronic component
Input voltage: 5-40V
Output voltage: 1.2-35V (continuously adjustable)
Output Current: 8A
Constant current range:0.2-8A ( adjustable )
Maximum Eficiency : 95{7e82c6d62784066d1b113f595afb6e15f0ca3fec289cddd29e600df910d44428}
Load Regulation : 1{7e82c6d62784066d1b113f595afb6e15f0ca3fec289cddd29e600df910d44428}
Voltage Regulation: 1{7e82c6d62784066d1b113f595afb6e15f0ca3fec289cddd29e600df910d44428}
Output Power: Maximum power is about 280W (power tube temperature exceeds 65°C please add cooling fan)
Short circuit protection: No (Please installs the fuse or protection circuit at input parts).
Input Reverse protection: No (please comply with a reverse protection or connect a diode at input parts.)
The temperature of the step up Module should not exceed 80C
Size: Approx. 2.55*1.88*0.94inch / 6.5*4.8*2.4cm(Length*width*thickness)
[!] Warnings
The maximum rated values should NEVER be continuous from the load or else the module will be damaged.
Be sure to install correct circuit protection, such as fuses, to the input of the module to avoid overloading and the potential for fire.
If temperature exceeds 65°C please add cooling fan
Failure to take these precautions and incorrect use of this module may result in damage, fire, and/or personal injury.
Output setpoint voltage must always be lower than applied input voltage.
Documents and Downloads
XL4016 8A 180KHz 40V Buck DC to DC Converter Datasheet
Package Includes
1x XL4016 CC-CV DC-DC Buck / Step-Down Converter
-11%
0%
150w Dc To Dc Boost Converter 10 32v To 12 35v 6a Step Up Power Supply Module Price in Pakistan
Original price was: ₨ 700.₨ 600Current price is: ₨ 600.
300w 20a Adjustable Dc-dc Step Down Buck Converter Voltage Regulator Power Supply Module
Original price was: ₨ 1500.₨ 1400Current price is: ₨ 1400.
Cc-cv Xl4016 9a Dc To Dc Adjustable Buck Converter in Pakistan
Original price was: ₨ 950.₨ 850Current price is: ₨ 850.
he DC-DC Step-Down 9A XL4016 voltage converter has the function of delivering a constant output voltage lower than the input voltage against variations in the input or load voltage. It supports output currents of up to 9A, input voltage between 8V to 40V and output voltage between 1.25V to 36V. The output voltage is selected by a multiturn potentiometer
Description
Reviews (0)
Shipping & Delivery
Related products
5A XL4015 Module Adjustable Step Down Buck Converter Price in Pakistan
Module nature: non-isolated step-down module
Rectification: Non-synchronous rectification
Input voltage: 5V-32V
Output voltage: 0.8V-30V
Output current: adjustable Z large 5A
Conversion efficiency: 95{7e82c6d62784066d1b113f595afb6e15f0ca3fec289cddd29e600df910d44428} (Z high)
Switching frequency: 300KHz
Output ripple: 50mV (Z large) 20M bandwidth
Load regulation: 0.5{7e82c6d62784066d1b113f595afb6e15f0ca3fec289cddd29e600df910d44428} Voltage regulation: 2.5{7e82c6d62784066d1b113f595afb6e15f0ca3fec289cddd29e600df910d44428}
Operating temperature: -40 C to + 85 C
LM2596 Dc To Dc Buck Converter Step Down Module Price in Pakistan
LM2596 DC-DC Buck Converter Step Down Module Power Supply is a step-down(buck) switching regulator. LM2596 Buck is capable of driving a 3-A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3 V, 5 V, 12 V, and an adjustable output version. The LM2596 Stepdown module is operating at a switching frequency of 150kHz, thus allowing smaller sized filter components than what would be required with lower frequency switching regulators
QC MOBILE POWER BOOST MODULE 5V 2.4A CHARGER CIRCUIT BOARD LCD DISPLAY Price in Pakistan
nput charging voltage: DC 5V 1A
2>.Input battery voltage:DC 3.7V-4.2V Polymer Rechargeable Lithium Battery
3>.Input type:Type-C/MicroUSB/Lighting
4>.Output channel:2CH
5>.Output voltage:5V2.4A
6>.Operating Temperature:-20℃~85℃
7>.Operating Humidity:5{7e82c6d62784066d1b113f595afb6e15f0ca3fec289cddd29e600df910d44428}~95{7e82c6d62784066d1b113f595afb6e15f0ca3fec289cddd29e600df910d44428}RH
8>.Module Size:68*27*11mm
Feature:
1>.Support discharge while charging
2>.Support dual USB output
3>.Support 3kinds input type
4>.Support QC fast charge
5>.Support display screen
TP5100 2A Li Ion Battery Charger Module Price in Pakistan
P5100 charger module is a 2A Lithium-Ion 18650 Battery Charger Module is a double switch buck 8.4V, single cell 4. 2V lithium battery charge management chip. TP 5100 module is ultra-compact QFN16 package and simple external circuit, making it ideal for portable equipment so large current charging management applications. Meanwhile, it’s built-in input overcurrent, under voltage protection, over-temperature protection, short circuit protection, battery temperature monitoring, reverse battery protection.
XH-M603 Battery Charge Controller Module Price in Pakistan
Quick specifications of the HW-632 (XH-M603) module (copied from the seller’s page) are:
Input Voltage: DC 10V to 30V
Display Precision: 0.1V
Control Precision: 0.1V
Voltage Tolerance: ±0.1V
Output Type: Direct Output
Battery Voltage: 12V to 24V
Dimension(mm): 82 x 58 x 18
It accomplishes this with a small microcontroller, two voltage regulator chips, a bunch of discrete components, two microswitches, a PCB screw terminal block, an electromagnetic relay, one red LED and a 3-digit LED display. All in all, it looks like a compact module.
Below you can see an annotated figure of the HW-632/XH-M603 module.
XL6009 Digital DC-DC Step Up Boost Converter 5 – 32V to 5 – 35V 10W (4A) Price in Pakistan
L6009 DC-DC Boost Converter 4A Adjustable Step-Up 5-32V to 5V-40V + LED Voltmeter
XL6009 is a 4A switch current high performance boost ( BOOST ) module. This module uses the second-generation high-frequency switching technology XL6009E1 as the core chip, and its performance far exceeds that of the first-generation technology LM2577 . The XL6009 booster module has lower cost and better performance, and the LM2577 module is about to be eliminated.
Characteristics:
XL7015 DC to DC Buck Converter Step Down Module In Pakistan
The XL7015 DC-DC step-down module is a high efficiency, high voltage step-down DC-DC converter that provides high 0.8A output current capability, low ripple, excellent linearity, and load regulation, and high input voltage. 80V, far more than 2596 and other modules. The chip has multiple protection mechanisms built in. Can be applied to electric vehicle controllers, etc.
Features:
5 v to 80 v input voltage range wide.
The output voltage from 5 v to 20 v adjustable.
The minimum pressure drops 1 v.
0.8 The biggest switch current.
Recommend the output power is less than 7 w.
Shut off built-in overheating protection, output short circuit protection, over current protection.
Good linear with load regulation.
The board size: 16 mm * 44 mm.
Wiring Instructions:
VIN: input voltage (5 v - 80 - v).
The GND: input voltage side.
The VOUT: output voltage (5 v - 20 v).
The GND: output voltage to end.
Package Includes:
1XXL7015 DC-DC Buck Converter Step Down Module 5V-80V Wide Voltage Input 7005A Super Than LM2596
Zb2l3 Hw-586 Hw586 Battery Capacity Tester External Load Discharge Type Module In Pakistan
ZB2L3 HW-586 Battery Capacity Tester: Precise and Safe
Enhance your battery testing with our reliable ZB2L3 HW-586 Battery Capacity Tester. This external load discharge module offers accurate measurements, thanks to its resistive load and specially designed DC bias. Prevent overheating by mounting the included 50W aluminum resistor on a metal plate before use.
Key Features:
Accurate battery capacity measurement
Resistive load for efficient testing
DC bias for improved accuracy
Safe operation
Easy-to-use interface
Reviews
There are no reviews yet.