Arduino RPM Rotational Speed Measuring Sensor in Pakistan
Digital Tachometer RPM, Speed or Pulse counting Sensor Module. Can be used with Arduino, Raspberry Pi, and other microcontroller boards.
Applications
RPM Sensing, Speed Sensing
As Home and End limit sensor in CNC machines
Position Detection Sensor
Pulse counting
Features
Output state indicator LED (LED ON means No obstruction)
Power state indicator LED
3.3V and 5V logic level compatibility
4 pin standard male header for interfacing with electronics
A fixed hole for easy installation
Built in LM393 comparator for perfect non-intermediate logic low and high output
The use of quality coupler slot sensor
Technical Specifications
Operating voltage: 3.3V-5V
Maxim Output Drive: 15mA
Digital Output (DO) Output Low : When No Obstruction
Digital Output (DO) Output High: When Obstructed
Analog Output: Near 0V when no obstruction, between 0V and VCC when less obstruction and Near VCC when full Obstruction
Header Pitch: Standard 0.1 inch (2.54mm)
Grove width : 5mm
PCB Size: 3.2cm x 1.4cm
Mounting Hole Diameter: 3.0mm
Pinouts
VCC
GND
DO (Digital Out)
AO (Analog Out)
Package Includes
1x Digital Tachometer RPM or Speed Sensor Module – FZ0888
-25%
0%
ISD1820 Recording And Playback Module With On Board Mic And Loud Speaker Price in Pakistan
Original price was: ₨ 450.₨ 400Current price is: ₨ 400.
49E Hall Effect Module Digital + Analog Price in Pakistan
Original price was: ₨ 170.₨ 150Current price is: ₨ 150.
Arduino RPM Rotational Speed Measuring Sensor in Pakistan
Original price was: ₨ 200.₨ 150Current price is: ₨ 150.
Arduino RPM Rotational Speed Measuring Sensor in Pakistan
Digital Tachometer RPM, Speed or Pulse counting Sensor Module. Can be used with Arduino, Raspberry Pi, and other microcontroller boards
Description
Additional information
| Weight | 300 kg |
|---|
Reviews (0)
Shipping & Delivery
Related products
Ch340 Arduino Mega 2560 With Cable In Pakistan
The Mega 2560 is a micro-controller board base on the CH340. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything need to support the micro-controller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get start. The Mega is compatible with most shields design for the Duemilanove or Diecimila.
The Mega 2560 is an update to the Mega, which it replaces. The Mega2560 differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the CH340 programmed as a USB-to-serial converter.
Revision 2 of the Mega2560 board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU mode.
Ch340g Usb To Ttl(serial) Converter For Arduino Price in Pakistan
This is PL2303 CH340G USB To TTL(Serial) Converter For Arduino Nano Raspberry Pi USB to TTL / USB-TTL /STC microcontroller programmer / PL2303 in nine upgrades plate with a transparent cover Compatible with ARDUINO, RASPBERRY PI, AVR, PIC, 8051, etc. This USB-TTL converter is based on CH340G USB to Serial TTL converter chip. The module can be used for 3.3V logic level signals, and has the option to switch from 5V to 3.3V logic level using a 2 pin shunt (shortening jumper for specific pins) supplied with the module.
MQ-4 Methane Natural Gas Sensor Module For Arduino in Pakistan
MQ4 High Sensitivity Gas Methane (CNG) Detector Sensor Module is a simple to use MQ-4 High Sensitivity Gas Methane (CNG) Detector Sensor Module which can sense the presence of Compressed Natural Gas(CNG), methane(CH4), etc in the air. The module uses our MQ-4 sensor. It simplifies the interface to the odd pin spacing of the sensor and provides the interface through standard 4 x 0.1″ header pins. It provides an analog output corresponding to the concentration of the gases in the air and an easy to use digital output. The onboard potentiometer can be used to set the maximum gas concentration beyond which the digital output gets triggered. Just power the module with 5V set the threshold and you can start getting the gas concentration of the air around the sensor! An onboard LED signals the presence of any gas.
Mq3 Alcohol Sensor Detector Gas Sensor Module In Pakistan
MQ3 MQ 3 MQ-3 Alcohol Detector Gas Sensor Module is a simple to use MQ-3 Alcohol Detector Gas Sensor Module which can sense the presence of Alcohol in the air. The module uses our MQ-3 sensor. It simplifies the interface to the odd pin spacing of the sensor and provides an interface through standard 4 x 0.1″ header pins. It provides an analog output corresponding to the concentration of the gas in the air and an easy to use digital output. The onboard potentiometer can be used to set the maximum gas concentration beyond which the digital output gets triggered. Just power the module with 5V set the threshold and you can start getting the gas concentration of the air around the sensor! An onboard LED signals the presence of any gas. Perfect sensing alcohol concentration on your breath just likes common breathalyzer.
mq3 alcohol sensor working
Mq8 Hydrogen Gas Sensor Module In Pakistan
MQ8 MQ 8 MQ-8 Hydrogen Gas Sensor Module H2 Alarm Detection MQ-8 Sensor Hydrogen Gas Sensor Module H2 Alarm Detection use in clean air low conductivity tin oxide (SnO2). When there is the environment in which the combustible gas sensor, conductivity sensor with increasing concentration of combustible gases in air increases. Using a simple circuit to convert the change in conductivity of the gas concentration corresponding to the output signal. MQ-8 hydrogen gas sensor of high sensitivity, the monitoring of the other hydrogen-containing gas is also very satisfactory. This sensor can detect a wide range of hydrogen gas, city gas, in particular, is a low-cost sensor for a variety of applications.
WROOM ESP32 Wifi Microcontroller Development Price in Pakistan
ESP32 is a prototyping board that is the work of the Shanghai-based company Espressif Systems. It incorporates the ESP32, a microprocessor tailored toward wearable electronics and IoT. It boasts integrated Wi-Fi and Bluetooth, along with an array of inbuilt antenna switches, and ultra-low power consumption. The company released the ESP8266 chip in 2014. Costing only a few dollars, this small chip is able to bridge an Arduino with a WiFi network, solving many issues that early IoT pioneers experienced.
1
Add to cart
Add to wishlist
Compare Tags: ESP esp32 ESP8266 nodemcu nodemuc wifi bluetooth wifi development board
Reviews
There are no reviews yet.