Electrical Specification
Working voltage range: 4.8-8.4V
No load speed:0.32sec/60°(4.8V), 0.22sec/60°(8.4V)
Runnig current:40mA(4.8V), 200mA(8.4V)
Peak stall torque: 32.7kg.cm(4.8V), 35.2kg.cm(8.4V)
Stall current: 2800mA±10%(4.8V), 3800mA±10%(8.4V)
Mechanical Specification
Size: 40.0*20.5*40.5mm
Weight: 56g±5%
Gear type: 5 Metal
Limit angle: 180°
Bearing: 2BB
Horn type: Plastic, POM
Case: Engineering plastics(PBT)+Aluminum alloy
Connector wire: 320mm±5mm
Motor: Carbon brush motor
Splash water resistance: yes
Control Specification
Command signal: Pulse width modification
Amplifier type: Digital controller Pulse width range: 500~2500usec
Neutral position: 1500usec
Running degree: 180°±3°(when 500~2500usec)
Dead band width: 5 usec
Rotating direction: Counterclockwise (when 1000~2000usec)
Storage Temperature Range: -30°C~80°C
Operating Temperature Range: -25°C~70°C
“MG995 12 kg Servo Motor in Pakistan” has been added to your cart. View cart
-10%

30kg Servo moter TD-8130MG Waterproof Price in Pakistan
₨ 5500 Original price was: ₨ 5500.₨ 5300Current price is: ₨ 5300.

MAX7219 Dot LED Matrix 4×1 Module MCU Control Unit Price in Pakistan
₨ 1300 Original price was: ₨ 1300.₨ 1200Current price is: ₨ 1200.
35KG METAL SERVO 180º TD-8135MG Price in Pakistan
₨ 6500 Original price was: ₨ 6500.₨ 5870Current price is: ₨ 5870.
Category: MOTER
Tag: METAL SERVO 180º
Description
Reviews (0)
Be the first to review “35KG METAL SERVO 180º TD-8135MG Price in Pakistan” Cancel reply
Shipping & Delivery


MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
16 Channel Servo Motor Driver Pca9685 12 Bit Pwm I2c Module For Arduino
Driver IC: PCA9685; Adjustable frequency PWM up to about 1.6 kHz; 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate; Reverse polarity protection on the terminal block input
Configurable push-pull or an open-drain output; The output enable pin to quickly disable all the outputs; Terminal block for power input; Green power-good LED
3 pin connectors in groups of 4 so you can plug in 16 servos at once; Chainable design; A spot to place a big capacitor on the V+ line220-ohm series resistors on all the output lines to protect them, and to make driving LEDs trivial.; This board/chip uses an I2C 7-bit address between 0x60-0x80, selectable with jumpers
Dimension:- Length: 62mm; Width: 25mm; Height: 15mm; Weight: 10gm
Packaged by:- Sharvi Technologies (OPC) Pvt. Ltd.; Address:- #09, CK Nagar, AECS layout, Hosa Road, Bangalore-560100
20kg Servo High Torque 180Angle TD-8120MG Waterproof Metal Gear Digital Servo Price in Pakistan
25kg Servomotor Digital TD-8125MG Price in Pakistan
28BYJ-48 5V DC Mini Stepper Motor with ULN2003 DIP IC Stepper Motor Driver Module
he module consists of a stepper motor driver plus a motor directly connectable to the module.
The use of this module is the stepper motor connection also known as step-by-step; A stepper motor is a motor that moves in discrete steps (single step). Rotation occurs thanks to a specific sequence of impulses of constant amplitude and time applied to its inputs.
5V Stepper Motor 28BYJ-48 With Drive Test Module Board ULN2003 5 Line 4 Phase
5 Line 4 phase can be driven by ordinary uln2003 chip
can also be connected in phase 2 development board used for.
supporting the use of a direct plug and easy to
use stepper motor used in the development board
Bldc Motor A2212 930kv Outrunner Brushless Dc Motors For Rc Helicopter Quadcopter
Multicopter and RC Aircraft:
High Performance
Excellent Quality
long life Japanese bearings
the precision-balanced rotor which makes this brushless motor very smooth and reliable
The metal gears help with the movement, they will rotate in the proper direction.
The brushless motors are way more powerful for their weight than brushed motors, and they last way longer
Specifications Of Quadcopter Drone A2212 930KV Brushless DC Motor BLDC:
KV: 930KV
Max Efficiency: 80%
Max Efficiency Current: 4-10A (>75%)
Current Capacity: 12A/60s
No Load Current @ 10V: 0.5A
No. Of Cells: 2-3 Li-Poly
Motor Dimensions: Φ27.5 x 30mm
Shaft Diameter: Φ3.17mm
Weight: 47g
Package Include:
1 x A2212 930KV Brushless Dc Motor
DC Air Pump 12V
MG995 12 kg Servo Motor in Pakistan
Operating Voltage: 4.8V – 7.2V
Torque: 10kg/cm (4.8V), 13kg/cm (6V), 15kg/cm (7.2V)
Speed: 0.20 sec/60° (4.8V), 0.16 sec/60° (6V), 0.14 sec/60° (7.2V)
Operating Temperature Range: -10°C to 50°C
Weight: 55g
Dimensions: 40.7 x 19.7 x 42.9 mm
Rotation: 360 degrees continuous
Gear Material: Metal
Bearing Type: Dual Ball Bearing
Connector Type: Universal
Compatibility: Standard servo pulse width (1,000μs to 2,000μs)
Reviews
There are no reviews yet.