Typ
Beschreibung
Alle auswählen
Kategorie
Netzteile, Stromversorgung – Platinenmontage
DC/DC-Wandler
Herst.
XP Power
Serie
IV (1W)
Verpackung
Stange
Status der Komponente
Obsolet
Typ
Isoliertes Modul
Anzahl der Ausgänge
1
Spannung – Eingang (min.)
43,2V
Spannung – Eingang (max.)
52,8V
Spannung – Ausgang 1
12V
Spannung – Ausgang 2
–
Spannung – Ausgang 3
–
Strom – Ausgang (max.)
84mA
Leistung (W)
1 W
Spannung – Isolation
3 kV
Anwendungen
ITE (Kommerziell)
Merkmale
–
Betriebstemperatur
-40°C bis 85°C
Effizienz
75%
Montagetyp
Durchkontaktierung
Gehäuse / Hülle
7-SIP-Modul, 4 Pins
Größe / Dimension
L x B x H: 0,76″ x 0,24″ x 0,39″ (19,3mm x 6,0mm x 10,0mm)
-14%
1470-2420-5-ND 2 Output 9V -9V 111mA, 111mA 43.2V - 52.8V Input
Original price was: ₨ 4000.₨ 3750Current price is: ₨ 3750.
1470-2408-5-ND 2 Output 3.3V -3.3V 200mA, 200mA 10.8V - 13.2V Input
Original price was: ₨ 4300.₨ 3900Current price is: ₨ 3900.
1470-2488-5-ND 12V 84mA 43,2V – 52,8V
Original price was: ₨ 4500.₨ 3850Current price is: ₨ 3850.
Description
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
150w Dc To Dc Boost Converter 10 32v To 12 35v 6a Step Up Power Supply Module
This 150W DC-DC Boost Converter 10-32V to 12-35V module allows you to step up an input voltage as low as 10V and set the output to 12V-35V. The output voltage will be higher than the input voltage. In addition the boost converter design is based on popular Texas Instrument’s UC3844 current mode PWM controller chip.
5V 1A Power Bank Charger Step Up Boost Charging Circuit Module Lithium Battery DIY Power Bank Module in Pakistan
This is the mobile power module Accessories, 18650 Circuit board shell. Meet the individual needs of your DIY, but you must understand basic electronic assembly. The use of the positive B + and b-negative welding note cannot be canceled Batteries: polymer battery 18650 lithium battery cell phone battery Tablet battery MP3 battery can be connected to a lithium battery can also be connected in several sections of lithium batteries, as long as the voltage is 3.7-4.2 V in parallel
LM2596 Dc To Dc Buck Converter Step Down Module Power Supply
LM2596 DC-DC Buck Converter Step Down Module Power Supply is a step-down(buck) switching regulator. LM2596 Buck is capable of driving a 3-A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3 V, 5 V, 12 V, and an adjustable output version. The LM2596 Stepdown module is operating at a switching frequency of 150kHz, thus allowing smaller sized filter components than what would be required with lower frequency switching regulators
Przetwornica step-up 4V-36V 10W 2A XL6007
Przetwornica podwyższająca napięcie typu step-up na układzie XL6007 pozwalająca z napięcia wejściowego w zakresie od 4V do 24V wygenerować napięcie na wyjściu między 4V a 36V.
Posiada wygodną regulację napięcia wyjściowego potencjometrem. Ma kompaktowe wymiary.
Specyfikacja:
podwyższająca typ step-up
napięcie wejściowe od 4V do 24V
napięcie wyjściowe od 4V do 36V
maksymalna moc 10W
maksymalny prąd 2A
wymiary 30mm x 15mm x 10mm
TP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection BMS
This 3.7V Battery Charger TP4056 module is made for charging rechargeable lithium batteries using the constant-current/constant-voltage (CC/CV) charging method. In addition to safely charging a lithium battery, TP4056 BMS Board also provides the necessary protection required by lithium batteries. The TP4056 is suitable for USB power and adapter power supplies. Due to the internal PMOSFET architecture and anti-reverse charging path, no external isolation diodes are required.
Specification of TP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection BMS:
Charge module: Linear charging.
Current:1A adjustable.
Charge precision:1.5%.
Input voltage:4.5V-5.5V.
Full charge voltage:4.2V ± 1%
Led indicator: red is charging Green is fully charged.
Input interface:micro USB/mini usb/type-c usb
Work temperature:-10° to +85°.
Inversed polarity: NO.
XL6009 DC-DC Step Up Boost Converter 5 – 32V to 5 – 35V 10W (4A)
XL6009 DC-DC Step Up Boost Converter 5 – 32V to 5 – 35V 10W (4A)
Xl6009 booster module is a 4A switching current high performance BOOST module, with the third generation of high frequency switch technology as the core chip, the performance is far superior to LM2577. It can be used for booster power supply, DIY adjustable mobile power supply, booster charger, etc.
Reviews
There are no reviews yet.