Type
Description
Select All
Category
Power Supplies – Board Mount
DC DC Converters
Mfr
XP Power
Series
IK (0.25W)
Packaging
Tube
Part Status
Obsolete
Type
Isolated Module
Number of Outputs
1
Voltage – Input (Min)
43.2V
Voltage – Input (Max)
52.8V
Voltage – Output 1
3.3V
Voltage – Output 2
–
Voltage – Output 3
–
Current – Output (Max)
75.7mA
Power (Watts)
250 mW
Voltage – Isolation
1 kV
Applications
ITE (Commercial)
Features
–
Operating Temperature
-40°C ~ 85°C
Efficiency
55%
Mounting Type
Through Hole
Package / Case
4-SIP Module
Size / Dimension
0.46″ L x 0.24″ W x 0.40″ H (11.7mm x 6.0mm x 10.2mm)
“Cc-cv Xl4016 9a Dc To Dc Adjustable Buck Converter” has been added to your cart. View cart
-14%

1470-2498-5-ND 1 Output 24V 42mA 36V - 72V Input
₨ 6300 Original price was: ₨ 6300.₨ 5750Current price is: ₨ 5750.

1470-2550-5-ND 1 Output 3.3V 1.3A 36V - 75V Input
₨ 6350 Original price was: ₨ 6350.₨ 5750Current price is: ₨ 5750.
1470-2435-5-ND 1 Output 3.3V 75.7mA 43.2V – 52.8V Input
₨ 4350 Original price was: ₨ 4350.₨ 3750Current price is: ₨ 3750.
Description
Reviews (0)
Be the first to review “1470-2435-5-ND 1 Output 3.3V 75.7mA 43.2V – 52.8V Input” Cancel reply
Shipping & Delivery


MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
1200w 20a Dc Converter Boost Step-up Power Supply Module In 8-60v Out 12-83v
150w Dc To Dc Boost Converter 10 32v To 12 35v 6a Step Up Power Supply Module
This 150W DC-DC Boost Converter 10-32V to 12-35V module allows you to step up an input voltage as low as 10V and set the output to 12V-35V. The output voltage will be higher than the input voltage. In addition the boost converter design is based on popular Texas Instrument’s UC3844 current mode PWM controller chip.
300w 20a Adjustable Dc-dc Step Down Buck Converter Voltage Regulator Power Supply Module
4A Buck Boost Converter Module Adjustable Step Down with LCD Display Power (HW-140)
4A Buck Boost Converter Module Adjustable Step Up and Step Down Function with LCD Display Power (HW-140)
Function Description:
The module has IN/OUT, ON/OFF two buttons: IN/OUT button switches input voltage and output voltage display, long press can switch output current output power display; ON/OFF button control output ON or OFF, long press can Set the default output status of the next power-on to be ON or OFF.
CC is the current setting potentiometer, clockwise rotation, can increase the set current, when the load current reaches the set current, enter the constant current state, the CC constant current indicator (red) lights up; the right CV is the voltage setting The potentiometer rotates clockwise to increase the output voltage. The ON indicator is an output status indicator that lights up when there is voltage at the output, otherwise it is off.
Instructions:
1. Use as a common buck-boost module with overcurrent protection
(1) Adjust the CV constant voltage device so that the output voltage reaches the voltage you want.
(2) Use the multimeter 10A current file to measure the output short-circuit current (directly connect the two test leads to the output terminal), and adjust the CC constant current potentiometer to make the output current reach the predetermined overcurrent protection value.
(3)(For example, if the current value displayed by the multimeter is 2A, then the maximum current can only be 2A when you use the module, and the red constant voltage constant current indicator will be on when the current reaches 2A, otherwise the indicator will be off)
Note: When using in this state, there is a current sampling resistor at the output, there will be a voltage drop of 0~0.2V after the load is connected, and at the same time, the input wire and the output wire will have a certain line voltage drop when the current is large. This is normal!
2. Use as a battery charger
Modules without constant current function cannot be used to charge the battery. Because the voltage difference between the battery and the charger that consumes electricity is too large, the charging current is too large, causing damage to the battery. Therefore, the battery should be used at the beginning. Stream charging, automatically switch back to constant voltage charging when charging to a certain extent electronicstore.pk
TP4056 C Type USB Port 1A 18650 Lithium Battery Charging Board Charger Module
Input voltage: 5V
Load cut-off voltage: 4.2V ± 1%
Maximum charging current: 1000mA
Excessive battery discharge protection voltage: 2.5V
Battery overcurrent protection current: 3A
Panel size: 17.16 mm x 26.17 mm
Charge precision: 1.5%.
Led indicator: red is charging Green is full charged.
Input interface: Type-C
Work temperature- -10° to +85°.
Reverse polarity protection: No
Size: 25X19X10mm.
works with all types of lipo & lithium batteries like 18650
Connect Battery with B+ & B-
Connect Battery load OUT+ & OUT – (this is uninterrupted power supply
XH-M603 Battery Charge Controller Module
Quick specifications of the HW-632 (XH-M603) module (copied from the seller’s page) are:
Input Voltage: DC 10V to 30V
Display Precision: 0.1V
Control Precision: 0.1V
Voltage Tolerance: ±0.1V
Output Type: Direct Output
Battery Voltage: 12V to 24V
Dimension(mm): 82 x 58 x 18
It accomplishes this with a small microcontroller, two voltage regulator chips, a bunch of discrete components, two microswitches, a PCB screw terminal block, an electromagnetic relay, one red LED and a 3-digit LED display. All in all, it looks like a compact module.
Below you can see an annotated figure of the HW-632/XH-M603 module.
XL4015 DC-DC Adjustable Step Down Module
Input voltage range:4~38VDC(Note: input voltage not exceeding 38V).
Output voltage range:1.25-36VDC adjustable.
Output current: 0-5A.
High efficiency up to 96%.
Output power: 75W.
Built-in thermal shutdown function
Built-in current limit function
In-Built output short protection function
Input reverse polarity protection: None (if required, the high current diode in series with the input).
Power Indicator: Yes
Short circuit protection: Yes (limit current 8A)
Overtemperature protection: (automatically shut off the output after overtemperature)
Input reverse polarity protection: No, (if necessary, please enter the string into the high current diode)
Installation: two 3mm screws
Dimensions(LxWxH): 54 x 23 x 15 mm.
XL6009 Digital DC-DC Step Up Boost Converter 5 – 32V to 5 – 35V 10W (4A)
L6009 DC-DC Boost Converter 4A Adjustable Step-Up 5-32V to 5V-40V + LED Voltmeter
XL6009 is a 4A switch current high performance boost ( BOOST ) module. This module uses the second-generation high-frequency switching technology XL6009E1 as the core chip, and its performance far exceeds that of the first-generation technology LM2577 . The XL6009 booster module has lower cost and better performance, and the LM2577 module is about to be eliminated.
Characteristics:
Reviews
There are no reviews yet.