Type
Description
Select All
Category
Power Supplies – Board Mount
DC DC Converters
Mfr
XP Power
Series
IE (1W)
Packaging
Tube
Part Status
Active
Type
Isolated Module
Number of Outputs
1
Voltage – Input (Min)
2.97V
Voltage – Input (Max)
3.63V
Voltage – Output 1
9V
Voltage – Output 2
–
Voltage – Output 3
–
Current – Output (Max)
111mA
Power (Watts)
1 W
Voltage – Isolation
3 kV
Applications
ITE (Commercial)
Features
–
Operating Temperature
-40°C ~ 85°C
Efficiency
74%
Mounting Type
Through Hole
Package / Case
4-SIP Module
Size / Dimension
0.46″ L x 0.24″ W x 0.50″ H (11.7mm x 6.0mm x 12.7mm)
Control Features
–
Base Product Number
IE0309
-6%
1470-2641-5-ND Isolated Module DC DC Converter 1 Output 15V 67mA 4.5V - 9V Input
Original price was: ₨ 2550.₨ 2375Current price is: ₨ 2375.
1470-1525-5-ND Isolated Module DC DC Converter 2 Output 5V -5V 100mA, 100mA 21.6V - 26.4V Input
Original price was: ₨ 2575.₨ 2275Current price is: ₨ 2275.
1470-1392-5-ND Isolated Module DC DC Converter 1 Output 9V 111mA 2.97V – 3.63V Input
Original price was: ₨ 2575.₨ 2425Current price is: ₨ 2425.
Description
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
150w Dc To Dc Boost Converter 10 32v To 12 35v 6a Step Up Power Supply Module
This 150W DC-DC Boost Converter 10-32V to 12-35V module allows you to step up an input voltage as low as 10V and set the output to 12V-35V. The output voltage will be higher than the input voltage. In addition the boost converter design is based on popular Texas Instrument’s UC3844 current mode PWM controller chip.
4A Buck Boost Converter Module Adjustable Step Down with LCD Display Power (HW-140)
4A Buck Boost Converter Module Adjustable Step Up and Step Down Function with LCD Display Power (HW-140)
Function Description:
The module has IN/OUT, ON/OFF two buttons: IN/OUT button switches input voltage and output voltage display, long press can switch output current output power display; ON/OFF button control output ON or OFF, long press can Set the default output status of the next power-on to be ON or OFF.
CC is the current setting potentiometer, clockwise rotation, can increase the set current, when the load current reaches the set current, enter the constant current state, the CC constant current indicator (red) lights up; the right CV is the voltage setting The potentiometer rotates clockwise to increase the output voltage. The ON indicator is an output status indicator that lights up when there is voltage at the output, otherwise it is off.
Instructions:
1. Use as a common buck-boost module with overcurrent protection
(1) Adjust the CV constant voltage device so that the output voltage reaches the voltage you want.
(2) Use the multimeter 10A current file to measure the output short-circuit current (directly connect the two test leads to the output terminal), and adjust the CC constant current potentiometer to make the output current reach the predetermined overcurrent protection value.
(3)(For example, if the current value displayed by the multimeter is 2A, then the maximum current can only be 2A when you use the module, and the red constant voltage constant current indicator will be on when the current reaches 2A, otherwise the indicator will be off)
Note: When using in this state, there is a current sampling resistor at the output, there will be a voltage drop of 0~0.2V after the load is connected, and at the same time, the input wire and the output wire will have a certain line voltage drop when the current is large. This is normal!
2. Use as a battery charger
Modules without constant current function cannot be used to charge the battery. Because the voltage difference between the battery and the charger that consumes electricity is too large, the charging current is too large, causing damage to the battery. Therefore, the battery should be used at the beginning. Stream charging, automatically switch back to constant voltage charging when charging to a certain extent electronicstore.pk
LM2596 Dc To Dc Buck Converter Step Down Module Power Supply
LM2596 DC-DC Buck Converter Step Down Module Power Supply is a step-down(buck) switching regulator. LM2596 Buck is capable of driving a 3-A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3 V, 5 V, 12 V, and an adjustable output version. The LM2596 Stepdown module is operating at a switching frequency of 150kHz, thus allowing smaller sized filter components than what would be required with lower frequency switching regulators
QC MOBILE POWER BOOST MODULE 5V 2.4A CHARGER CIRCUIT BOARD LCD DISPLAY
nput charging voltage: DC 5V 1A
2>.Input battery voltage:DC 3.7V-4.2V Polymer Rechargeable Lithium Battery
3>.Input type:Type-C/MicroUSB/Lighting
4>.Output channel:2CH
5>.Output voltage:5V2.4A
6>.Operating Temperature:-20℃~85℃
7>.Operating Humidity:5%~95%RH
8>.Module Size:68*27*11mm
Feature:
1>.Support discharge while charging
2>.Support dual USB output
3>.Support 3kinds input type
4>.Support QC fast charge
5>.Support display screen
XL4015 5A Step Down Module with Digital Voltmeter
XL4015 5A Step Down Module with Digital Voltmeter
The module comes equipped with a voltmeter, ammeter, power meter, and a USB interface for charging digital products.
A buck converter or step-down converter is a DC-to-DC converter that steps down voltage (while stepping up current) from its input (supply) to its output (load). It is a class of switched-mode power supply. This product is a 180 KHz fixed frequency PWM buck (step-down) DC/DC module, capable of driving a 5A load with high efficiency, low ripple, and excellent line and load regulation. The module with a voltage meter to display the input voltage and output voltage, and the voltage can be corrected through the button to improve the accuracy of the voltmeter
XL4015 DC-DC Adjustable Step Down Module
Input voltage range：4～38VDC(Note: input voltage not exceeding 38V).
Output voltage range：1.25-36VDC adjustable.
Output current: 0-5A.
High efficiency up to 96%.
Output power: 75W.
Built-in thermal shutdown function
Built-in current limit function
In-Built output short protection function
Input reverse polarity protection: None (if required, the high current diode in series with the input).
Power Indicator: Yes
Short circuit protection: Yes (limit current 8A)
Overtemperature protection: (automatically shut off the output after overtemperature)
Input reverse polarity protection: No, (if necessary, please enter the string into the high current diode)
Installation: two 3mm screws
Dimensions(LxWxH): 54 x 23 x 15 mm.
XL6009 Digital DC-DC Step Up Boost Converter 5 – 32V to 5 – 35V 10W (4A)
L6009 DC-DC Boost Converter 4A Adjustable Step-Up 5-32V to 5V-40V + LED Voltmeter
XL6009 is a 4A switch current high performance boost ( BOOST ) module. This module uses the second-generation high-frequency switching technology XL6009E1 as the core chip, and its performance far exceeds that of the first-generation technology LM2577 . The XL6009 booster module has lower cost and better performance, and the LM2577 module is about to be eliminated.
Characteristics:
Reviews
There are no reviews yet.