The module is equipped with the ZMCT103C series of small high-precision current transformers and high-precision op amp circuits for accurate sampling and proper compensation of signals. It is convenient for signal acquisition of AC power within 5A. The corresponding output analog AC signal can be adjusted. The required output voltage can be adjusted according to the potentiometer (adjusting the amplification ratio, the amplification range is 0-100 times), but the maximum voltage at the output (OUT) will not exceed 1/2 VCC:Features
ZMCT103C parameters
Rated input current: 5A
Rated output current: 5mA
Change ratio: 1000:1
Phase difference: less than or equal to 20′ (100Ω)
Linear range: 0-10A (100Ω)
Linearity: 0.2{7e82c6d62784066d1b113f595afb6e15f0ca3fec289cddd29e600df910d44428}
Precision level: 0.2
Isolation withstand voltage: 3000V
Working temperature: -40 ° C ~ 70 ° C
Sealing material: epoxy resin
Module supply voltage: 5-30V DC
Package Include:
1 x ZMCT103C 5A Range Single Phase AC Active Output Current Transformer Module
-22%
0%
ACS758 50A Range Hall Effect Linear Current Sensor Module Price in Pakistan
Original price was: ₨ 1200.₨ 1025Current price is: ₨ 1025.
MG945 Servo Moter in Pakistan
Original price was: ₨ 1200.₨ 700Current price is: ₨ 700.
Zmct103c 5a Range Single Phase Ac Active Output Onboard Precision Micro Current Transformer Module Current Sensor Price in Pakistan
Original price was: ₨ 450.₨ 350Current price is: ₨ 350.
Features
ZMCT103C parameters
Rated input current: 5A
Rated output current: 5mA
Change ratio: 1000:1
Phase difference: less than or equal to 20′ (100Ω)
Linear range: 0-10A (100Ω)
Linearity: 0.2{7e82c6d62784066d1b113f595afb6e15f0ca3fec289cddd29e600df910d44428}
Precision level: 0.2
Isolation withstand voltage: 3000V
Working temperature: -40 ° C ~ 70 ° C
Sealing material: epoxy resin
Module supply voltage: 5-30V DC
Description
Reviews (0)
Shipping & Delivery
Related products
Arduino Due With Cable Price in Pakistan
The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU. It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), a 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button.
Arduino Leonardo Atmega32u Price In Pakistan
It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs); a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything need to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.
Arduino Mega 2560 R3 In Pakistan
PERATING VOLTAGE: 5V
INPUT VOLTAGE (RECOMMENDED): 7-12V
INPUT VOLTAGE (LIMIT): 6-20V
DIGITAL I/O PINS: 54 (of which 15 provide PWM output)
ANALOG INPUT PINS: 16DC
CURRENT PER I/O PIN20 mADC CURRENT FOR 3.3V PIN: 50 mA
FLASH MEMORY: 256 KB of which 8 KB used by bootloader
SRAM: 8KB
EEPROM: 4 KB
CLOCK SPEED16 MHz
LED_BUILTIN13
LENGTH: 101.52 mm
WIDTH: 53.3 mm
WEIGHT: 37 g
Click Here to Download Open Source Arduino Software
EAGLE FILES IN .ZIP
SCHEMATICS
BOARD SIZE .IN
GY-271 HMC5883L Triple Axis Compass Magnetometer Sensor Module in Pakistan
The GY-271 module is based on the Honeywell HMC5883L IC for low-field magnetic sensing with a digital interface for applications such as lowcost compassing and magnetometry. The HMC5883L includes state-of-theart, high-resolution HMC118X series magneto-resistive sensors plus an ASIC containing amplification, automatic degaussing strap drivers, offset cancellation and a 12-bit ADC that enables.
MQ-4 Methane Natural Gas Sensor Module For Arduino in Pakistan
MQ4 High Sensitivity Gas Methane (CNG) Detector Sensor Module is a simple to use MQ-4 High Sensitivity Gas Methane (CNG) Detector Sensor Module which can sense the presence of Compressed Natural Gas(CNG), methane(CH4), etc in the air. The module uses our MQ-4 sensor. It simplifies the interface to the odd pin spacing of the sensor and provides the interface through standard 4 x 0.1″ header pins. It provides an analog output corresponding to the concentration of the gases in the air and an easy to use digital output. The onboard potentiometer can be used to set the maximum gas concentration beyond which the digital output gets triggered. Just power the module with 5V set the threshold and you can start getting the gas concentration of the air around the sensor! An onboard LED signals the presence of any gas.
Reviews
There are no reviews yet.