RS-232 RS232 serial to RS485/RS422 485/422 Converter
Compatibility: EIA/TIA RS232C standard and RS485/RS422 standard
Interface RS232 side: DB9 female connector
Interface RS485/RS422 side: DB9 male connector with optional (included) terminal board
Transmission rate: 300 to 115,200bps
Transmission distance: RS422 maximum 1200m, RS232 side maximum 5m
Working modes: asynchronous, duplex and differential transmission
Working environment: 0 to 70°C
Relative humidity 5 to 95{7e82c6d62784066d1b113f595afb6e15f0ca3fec289cddd29e600df910d44428}
Mechanical dimensions: 95 x 33 x 17mm
“RS485 to TTL UART Converter Module Price in Pakistan” has been added to your cart. View cart
-10%
Ne555 Pulse Frequency Duty Cycle Adjustable Module Square Wave Signal Generator Price in Pakistan
₨ 200 Original price was: ₨ 200.₨ 170Current price is: ₨ 170.
RS232 to RS485 communication protocol converter Price in Pakistan
₨ 1800 Original price was: ₨ 1800.₨ 1280Current price is: ₨ 1280.
RS-232 RS232 serial to RS485/RS422 485/422 Converter Price in Pakistan
₨ 3350 Original price was: ₨ 3350.₨ 3000Current price is: ₨ 3000.
RS-232 RS232 serial to RS485/RS422 485/422 Converter
Compatibility: EIA/TIA RS232C standard and RS485/RS422 standard
Interface RS232 side: DB9 female connector
Interface RS485/RS422 side: DB9 male connector with optional (included) terminal board
Transmission rate: 300 to 115,200bps
Transmission distance: RS422 maximum 1200m, RS232 side maximum 5m
Working modes: asynchronous, duplex and differential transmission
Working environment: 0 to 70°C
Relative humidity 5 to 95{7e82c6d62784066d1b113f595afb6e15f0ca3fec289cddd29e600df910d44428}
Mechanical dimensions: 95 x 33 x 17mm
Category: SENSOR/MODULE
Description
Reviews (0)
Be the first to review “RS-232 RS232 serial to RS485/RS422 485/422 Converter Price in Pakistan” Cancel reply
Shipping & Delivery
Related products
Arduino Due With Cable Price in Pakistan
Rated 2.00 out of 5
The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU. It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), a 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button.
Ch340 Arduino Mega 2560 With Cable In Pakistan
The Mega 2560 is a micro-controller board base on the CH340. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything need to support the micro-controller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get start. The Mega is compatible with most shields design for the Duemilanove or Diecimila.
The Mega 2560 is an update to the Mega, which it replaces. The Mega2560 differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the CH340 programmed as a USB-to-serial converter.
Revision 2 of the Mega2560 board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU mode.
ESP32 CAM Base MB Programming Adapter Board CH340 Serial To USB for ESP32-CAM Module
GY-271 HMC5883L Triple Axis Compass Magnetometer Sensor Module in Pakistan
The GY-271 module is based on the Honeywell HMC5883L IC for low-field magnetic sensing with a digital interface for applications such as lowcost compassing and magnetometry. The HMC5883L includes state-of-theart, high-resolution HMC118X series magneto-resistive sensors plus an ASIC containing amplification, automatic degaussing strap drivers, offset cancellation and a 12-bit ADC that enables.
Mq135 Air Quality Detector Sensor Module In Pakistan
The MQ 135 Air Quality Detector Sensor Module For Arduino has lower conductivity in clean air. When the target combustible gas exists, the conductivity of the sensor is higher along with the gas concentration rising. Convert change of conductivity to the corresponding output signal of gas concentration. The MQ135 gas sensor has high sensitivity to Ammonia, Sulphide and Benzene steam, also sensitive to smoke and other harmful gases. It is with low cost and suitable for different applications such as harmful gases/smoke detection
Mq3 Alcohol Sensor Detector Gas Sensor Module In Pakistan
MQ3 MQ 3 MQ-3 Alcohol Detector Gas Sensor Module is a simple to use MQ-3 Alcohol Detector Gas Sensor Module which can sense the presence of Alcohol in the air. The module uses our MQ-3 sensor. It simplifies the interface to the odd pin spacing of the sensor and provides an interface through standard 4 x 0.1″ header pins. It provides an analog output corresponding to the concentration of the gas in the air and an easy to use digital output. The onboard potentiometer can be used to set the maximum gas concentration beyond which the digital output gets triggered. Just power the module with 5V set the threshold and you can start getting the gas concentration of the air around the sensor! An onboard LED signals the presence of any gas. Perfect sensing alcohol concentration on your breath just likes common breathalyzer.
mq3 alcohol sensor working
RS485 to TTL UART Converter Module Price in Pakistan
RS485 to TTL / TTL to RS485 converter is a module that allows the TTL interface of the microcontroller to be transferred to the RS485 module / MAX485 module. It is generally used for industrial automation. This module adds lightning protection design and anti-jamming design. When we use it in the field and carry out long distance transmission, we can Connect the GND end of the module to the ground so that lightning protection and anti-interference can be achieved. This Max485 to TTL module is online in Pakistan
USB to RS485 / USB 2.0 to RS 485 Serial Converter Adapter Price in Pakistan
The USB to RS485 Converter Adapter module support WIN7 XP Vista Linux Mac OS provides an easy-to-use RS485 interface by means of a Virtual Com Port on the user’s system. There are no command structures, whatever is sent to the Virtual Comm Port is automatically converted to RS485 and vice versa. The module is completely self-powered from the USB bus. Controlling / Communicating with RS-485 devices from your PC has never been easier! This device is plug-and-play. It shows up as a serial/com port and is accessible from applications or hyper-terminal.

Reviews
There are no reviews yet.