MQ-5 Natural/ LPG Gas Sensor Module for Arduino
Features
Small sensitivity to LPG, H2, LPG, CH4, and CO
Fast response
Stable and long life
Simple drive circuit
Indication of the signal output.
Dual signal output (analog output, and TTL level output)
TTL output signal is low. (When low output signal light, and can be connected directly to the microcontroller)
Liquefied petroleum gas, natural gas, city gas, better sensitivity.
Has a long life and reliable stability
Specifications
Working Voltage: 4.9V-5.1V
Heater Resistance: 31±10{7e82c6d62784066d1b113f595afb6e15f0ca3fec289cddd29e600df910d44428}
Adjustable Resistance
Sensing Resistance Range: 10 – 60K
Sensor Heat Consumption: 0.5-800mW
Detecting Concentration: 200-10000ppm
Pinouts of MQ5 Sensor
Pin Name Description
Vcc Power Pin requires an operating voltage of 5V.
GND Ground pin.
DO Digital out the pin, to get the digital output from the sensor, need to set the threshold value using Pot.
AO Analog out the pin. It based the output of this pin on the intensity of the methane gas.
-20%
0%
MQ-4 Methane Natural Gas Sensor Module For Arduino in Pakistan
Original price was: ₨ 450.₨ 400Current price is: ₨ 400.
MQ-6 LPG/Butane Gas Sensor Module Price in Pakistan
Original price was: ₨ 450.₨ 400Current price is: ₨ 400.
MQ-5 Natural/ LPG Gas Sensor Module Price in Pakistan
Original price was: ₨ 500.₨ 400Current price is: ₨ 400.
MQ-5 Natural/ LPG Gas Sensor Module are used in gas leakage detecting houses and industries. Sensitive for LPG, natural gas, coal gas.
Description
Reviews (0)
Shipping & Delivery
Related products
Esp32-cam Wifi + Bluetooth Camera Module Development Board Esp32 With Camera Module Ov2640 in Pakistan
SP32-CAM is a WIFI+ Bluetooth dual-mode development board that uses PCB on-board antennas and cores based on ESP32 chips. It can work independently as a minimum system.ESP integrates WiFi, traditional Bluetooth, and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture, main frequency adjustment range 80MHz to 240MHz, on-chip sensor, Hall sensor, temperature sensor, etc. Fully compliant with WiFi 802.11b/g/n/e/i and Bluetooth 4.2 standards, it can be used as a master mode to build an independent network controller, or as a slave to other hosts MCUs to add networking capabilities to existing devices.ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals, and other IoT applications. It is an ideal solution for IoT applications.
Features:
Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
Low-power dual-core 32-bit CPU for application processors
Up to 240MHz, up to 600 DMIPS
Built-in 520 KB SRAM, external 4M PSRAM
Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
Support OV2640 and OV7670 cameras with built-in flash
Support for images WiFI upload
Support TF card
Support multiple sleep modes
Embedded Lwip and FreeRTOS
Support STA/AP/STA+AP working mode
Support Smart Config/AirKiss One-click distribution network
Support for serial local upgrade and remote firmware upgrade (FOTA)
Support secondary development
MQ-4 Methane Natural Gas Sensor Module For Arduino in Pakistan
MQ4 High Sensitivity Gas Methane (CNG) Detector Sensor Module is a simple to use MQ-4 High Sensitivity Gas Methane (CNG) Detector Sensor Module which can sense the presence of Compressed Natural Gas(CNG), methane(CH4), etc in the air. The module uses our MQ-4 sensor. It simplifies the interface to the odd pin spacing of the sensor and provides the interface through standard 4 x 0.1″ header pins. It provides an analog output corresponding to the concentration of the gases in the air and an easy to use digital output. The onboard potentiometer can be used to set the maximum gas concentration beyond which the digital output gets triggered. Just power the module with 5V set the threshold and you can start getting the gas concentration of the air around the sensor! An onboard LED signals the presence of any gas.
RS485 to TTL UART Converter Module Price in Pakistan
RS485 to TTL / TTL to RS485 converter is a module that allows the TTL interface of the microcontroller to be transferred to the RS485 module / MAX485 module. It is generally used for industrial automation. This module adds lightning protection design and anti-jamming design. When we use it in the field and carry out long distance transmission, we can Connect the GND end of the module to the ground so that lightning protection and anti-interference can be achieved. This Max485 to TTL module is online in Pakistan
WROOM ESP32 Wifi Microcontroller Development Price in Pakistan
ESP32 is a prototyping board that is the work of the Shanghai-based company Espressif Systems. It incorporates the ESP32, a microprocessor tailored toward wearable electronics and IoT. It boasts integrated Wi-Fi and Bluetooth, along with an array of inbuilt antenna switches, and ultra-low power consumption. The company released the ESP8266 chip in 2014. Costing only a few dollars, this small chip is able to bridge an Arduino with a WiFi network, solving many issues that early IoT pioneers experienced.
1
Add to cart
Add to wishlist
Compare Tags: ESP esp32 ESP8266 nodemcu nodemuc wifi bluetooth wifi development board
Reviews
There are no reviews yet.