The HLW8012 is a single phase energy meter IC from HLW Technology. HLM8012 provides RMS current, RMS voltage sampling and RMS active power with an internal clock and a PWM interface in a SOP-8 package.
The HWL8012 is a 5 Volt IC that monitors both voltage and current and output RMS voltage, current and active power encoded as a 50% duty cycle square wave where the frequency is proportional to the magnitude. The HLW8012 Energy Meter Module can be directly interfaced to Arduino, ESP8266, ESP32, Node MCU or any other Microcontroller.
We have Various sizes of Misc Modules. Check out our complete collection of Misc Modules. We also have HLW8012 Energy meter IC
“NodeMCU Lolin V3 ESP8266 WiFi Microcontroller Module” has been added to your cart. View cart
-8%

3S 12V 12.6V 1.2A Li-ion Lipo Lifepo4 Battery Active Equalizer BMS Balancer Inductive Balance Lithium Battery Energy Transfer Board
₨ 1500 Original price was: ₨ 1500.₨ 1350Current price is: ₨ 1350.

NEO 7M GPS Module Micro USB satellite Positioning Module
₨ 1700 Original price was: ₨ 1700.₨ 1450Current price is: ₨ 1450.
HLW8012 Energy Meter Module
₨ 1300 Original price was: ₨ 1300.₨ 1200Current price is: ₨ 1200.
Category: SENSOR/MODULE
Tag: HLW8012 Energy Meter Module
Description
Reviews (0)
Be the first to review “HLW8012 Energy Meter Module” Cancel reply
Shipping & Delivery


MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Arduino Leonardo In Pakistan Atmega32u Based Development Board
Arduino Leonardo In Pakistan Atmega32u Based Development Board (Copy)
Cp2102 Usb To Serial Usb To Uart Ttl Serial Module
GY-271 HMC5883L Triple Axis Compass Magnetometer Sensor Module in Pakistan
The GY-271 module is based on the Honeywell HMC5883L IC for low-field magnetic sensing with a digital interface for applications such as lowcost compassing and magnetometry. The HMC5883L includes state-of-theart, high-resolution HMC118X series magneto-resistive sensors plus an ASIC containing amplification, automatic degaussing strap drivers, offset cancellation and a 12-bit ADC that enables.
MQ-7 Carbon Mono Oxide Gas Sensor Module
Mq135 Air Quality Detector Sensor Module In Pakistan
The MQ 135 Air Quality Detector Sensor Module For Arduino has lower conductivity in clean air. When the target combustible gas exists, the conductivity of the sensor is higher along with the gas concentration rising. Convert change of conductivity to the corresponding output signal of gas concentration. The MQ135 gas sensor has high sensitivity to Ammonia, Sulphide and Benzene steam, also sensitive to smoke and other harmful gases. It is with low cost and suitable for different applications such as harmful gases/smoke detection
Mq4 High Sensitivity Gas Methane (cng) Detector Sensor Module
MQ4 High Sensitivity Gas Methane (CNG) Detector Sensor Module is a simple to use MQ-4 High Sensitivity Gas Methane (CNG) Detector Sensor Module which can sense the presence of Compressed Natural Gas(CNG), methane(CH4), etc in the air. The module uses our MQ-4 sensor. It simplifies the interface to the odd pin spacing of the sensor and provides the interface through standard 4 x 0.1″ header pins. It provides an analog output corresponding to the concentration of the gases in the air and an easy to use digital output. The onboard potentiometer can be used to set the maximum gas concentration beyond which the digital output gets triggered. Just power the module with 5V set the threshold and you can start getting the gas concentration of the air around the sensor! An onboard LED signals the presence of any gas.
WROOM ESP32 Wifi Microcontroller Development
ESP32 is a prototyping board that is the work of the Shanghai-based company Espressif Systems. It incorporates the ESP32, a microprocessor tailored toward wearable electronics and IoT. It boasts integrated Wi-Fi and Bluetooth, along with an array of inbuilt antenna switches, and ultra-low power consumption. The company released the ESP8266 chip in 2014. Costing only a few dollars, this small chip is able to bridge an Arduino with a WiFi network, solving many issues that early IoT pioneers experienced.
1
Add to cart
Add to wishlist
Compare Tags: ESP esp32 ESP8266 nodemcu nodemuc wifi bluetooth wifi development board
Reviews
There are no reviews yet.