-11%
360 product view
    Click to enlarge
    SR-04 Ultrasonic Distance Measuring Sensor Module Original price was: ₨ 220.Current price is: ₨ 200.
    Back to products
    4.5 inch Flex Sensor In Pakistan Bend Detection Sensor Original price was: ₨ 5500.Current price is: ₨ 4850.

    Flex sensor 2.2 inch Price in Pakistan

    Original price was: ₨ 2200.Current price is: ₨ 1950.

    A 2.2 Inch Flex Sensor – Bend Sensor with a length of 2.2″ which bends and flexes with a physical device. In addition the sensor is flex, the resistance across the sensor increases. Hence a connector is 0.1″ spaced and breadboard friendly. Applications in – Robotics, Gaming (Virtual Motion), Medical Devices, Computer Peripherals, Musical Instruments, ans also a Physical Therapy.

    Compare
    Add to wishlist
    Category: Tag:
    Description

    Flex Bend Sensor 2.2 Inch Flex Pressure Sensor for Robot Hand Electronic Gloves Resistive Flex Sensor
    A simple flex sensor 2.2″ in length. As the sensor is flexed, the resistance across the sensor increases.

    The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend).

    Connector is 0.1″ spaced and bread board friendly.

    The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend).

    Attention: Bending direction: the side with words is the inner side during bending. Avoid bending the end pin part (i.e. non-bending detection part) when using, otherwise it may cause damage.

    Technical specifications
    Resistance in straight state: 25K ohms
    Resistance value tolerance: ± 30%
    Bending resistance change: 60K~110K ohms
    Nominal power: 0.5 watts
    Peak power: 1 watt
    Bending life:>1 million times
    Operating temperature: -35°C~+80°C
    Length x width: 73.66×6.35mm
    Interface Type: 2-pin metal pins (0.1″ spacing)

    Reviews (0)

    Reviews

    There are no reviews yet.

    Be the first to review “Flex sensor 2.2 inch Price in Pakistan”

    Your email address will not be published. Required fields are marked *

    Shipping & Delivery
    wd-ship-1
    wd-ship-2

    MAECENAS IACULIS

    Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

    ADIPISCING CONVALLIS BULUM

    • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
    • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
    • Diam parturient dictumst parturient scelerisque nibh lectus.

    Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

    Related products

    -14%
    Compare

    Arduino Leonardo In Pakistan Atmega32u Based Development Board

    ,
    Original price was: ₨ 1850.Current price is: ₨ 1600.
    The Arduino Leonardo is a micro-controller board base on the ATmega32u4 (datasheet). It has 20 digital input/output pins (of which
    Add to wishlist
    Add to cart
    Quick view
    -8%
    Compare

    Arduino Mega 2560 R3 In Pakistan

    ,
    Original price was: ₨ 4300.Current price is: ₨ 3950.
    The Arduino Mega 2560 is a microcontroller board based on the ATmega2560 (datasheet). It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Uno, Duemilanove or Diecimila.
    Add to wishlist
    Add to cart
    Quick view
    -9%
    Compare

    Ch340g Usb To Ttl(serial) Converter For Arduino

    Original price was: ₨ 220.Current price is: ₨ 200.
    This is PL2303 CH340G USB To TTL(Serial) Converter For Arduino Nano Raspberry Pi USB to TTL / USB-TTL /STC microcontroller programmer / PL2303 in nine upgrades plate with a transparent cover Compatible with ARDUINO, RASPBERRY PI, AVR, PIC, 8051, etc. This USB-TTL converter is based on CH340G USB to Serial TTL converter chip. The module can be used for 3.3V logic level signals, and has the option to switch from 5V to 3.3V logic level using a 2 pin shunt (shortening jumper for specific pins) supplied with the module.
    Add to wishlist
    Add to cart
    Quick view
    -7%
    Compare

    ESP32 WROOM-32 38-pins Wifi+Bluetooth MCU Module

    ,
    Original price was: ₨ 1350.Current price is: ₨ 1250.
    ESP32 WROOM-32 38-pins Wifi+Bluetooth MCU Module This is ESP WROOM 32/ ESP32 Wi-Fi-BT-BLE MCU Module. ESP WROOM 32 is a powerful, generic WiFi-BT-BLE MCU module that targets a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming, and MP3 decoding. At the core of this module is the ESP32 chip, which is designed to be scalable and adaptive. There are 2 CPU cores that can be individually controlled or powered, and the clock frequency is adjustable from 80 MHz to 240 MH
    Add to wishlist
    Add to cart
    Quick view
    -16%
    Compare

    MAX6675 Module + K Type Thermocouple

    Original price was: ₨ 950.Current price is: ₨ 800.
    This temperature sensor and module makes use of the Maxim MAX6675 K-Thermocouple to digital converter IC to provide a microcontroller compatible digital serial interface (SPI compatible) to provide accurate temperature compensated measurement of the supplied K-Type thermocouple sensor. This sensor is available at electronicstore.pk shop online in Pakistan.
    Add to wishlist
    Add to cart
    Quick view
    -14%
    Compare

    Mq2 Gas Sensor Detector Module In Pakistan

    Original price was: ₨ 350.Current price is: ₨ 300.
    Features: Sensitive for LPG, propane, hydrogen Output voltage boosts along with the concentration of the measured gases increases Fast response
    Add to wishlist
    Add to cart
    Quick view
    -25%
    Compare

    Mq3 Alcohol Sensor Detector Gas Sensor Module In Pakistan

    Original price was: ₨ 400.Current price is: ₨ 300.
    MQ3 MQ 3 MQ-3 Alcohol Detector Gas Sensor Module is a simple to use MQ-3 Alcohol Detector Gas Sensor Module which can sense the presence of Alcohol in the air. The module uses our MQ-3 sensor. It simplifies the interface to the odd pin spacing of the sensor and provides an interface through standard 4 x 0.1″ header pins. It provides an analog output corresponding to the concentration of the gas in the air and an easy to use digital output. The onboard potentiometer can be used to set the maximum gas concentration beyond which the digital output gets triggered. Just power the module with 5V set the threshold and you can start getting the gas concentration of the air around the sensor! An onboard LED signals the presence of any gas. Perfect sensing alcohol concentration on your breath just likes common breathalyzer. mq3 alcohol sensor working
    Add to wishlist
    Add to cart
    Quick view
    -13%
    Compare

    Mq4 High Sensitivity Gas Methane (cng) Detector Sensor Module

    Original price was: ₨ 400.Current price is: ₨ 350.
    MQ4 High Sensitivity Gas Methane (CNG) Detector Sensor Module is a simple to use MQ-4 High Sensitivity Gas Methane (CNG) Detector Sensor Module which can sense the presence of Compressed Natural Gas(CNG), methane(CH4), etc in the air. The module uses our MQ-4 sensor. It simplifies the interface to the odd pin spacing of the sensor and provides the interface through standard 4 x 0.1″ header pins. It provides an analog output corresponding to the concentration of the gases in the air and an easy to use digital output. The onboard potentiometer can be used to set the maximum gas concentration beyond which the digital output gets triggered. Just power the module with 5V set the threshold and you can start getting the gas concentration of the air around the sensor! An onboard LED signals the presence of any gas.
    Add to wishlist
    Add to cart
    Quick view