Signal Frequency output range: 0-40MHz
* 4 Signal outputs: 2 sine wave outputs and 2 square wave outputs
* DAC SFDR > 50 dB @ 40 MHz AOUT
* 32-Bit Frequency Tuning Word
* Simplified Control Interface: Parallel Byte or Serial Loading Format
* Phase Modulation Capability
* +3.3 V or +5 V Single Supply Operation
* Low Power: 380 mW @ 125 MHz (+5 V)
* Low Power: 155 mW @ 110 MHz (+3.3 V)
* Power-Down Function
Like our page
-11%
HX711 Pressure Sensor Load Cell Amplifier Module Price in Pakistan
Original price was: ₨ 180.₨ 150Current price is: ₨ 150.
26 Pin GPIO Extension board for Raspberry pi Price in Pakistan
Original price was: ₨ 1000.₨ 850Current price is: ₨ 850.
DDS Signal Generator Module (0-40MHz) – AD9850 Price in Pakistan
Original price was: ₨ 4500.₨ 4000Current price is: ₨ 4000.
AD9850: 0-40MHz.
2). 2 sine wave and 2 square wave output.
3). After the 20-30MHz frequency harmonics increases, the waveform will be less and less clean.
4). Square Wave: 0-1MHz.
5). Low-pass filter with 70MHz, so the waveform better than SN.
6). Parallel and serial data input can be selected via a jumper.
7). DA produced the benchmark pin (PIN12) leads for easy adjustment to do the magnitude of the output waveform Application.
8). Comparator reference input voltage generated by the variable resistor, the resistor can be adjusted duty cycle square wave of different.
9). Active AD9850 125MHz crystal oscillator modules.
Description
Reviews (0)
Shipping & Delivery
Related products
Esp32-cam Wifi + Bluetooth Camera Module Development Board Esp32 With Camera Module Ov2640 in Pakistan
SP32-CAM is a WIFI+ Bluetooth dual-mode development board that uses PCB on-board antennas and cores based on ESP32 chips. It can work independently as a minimum system.ESP integrates WiFi, traditional Bluetooth, and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture, main frequency adjustment range 80MHz to 240MHz, on-chip sensor, Hall sensor, temperature sensor, etc. Fully compliant with WiFi 802.11b/g/n/e/i and Bluetooth 4.2 standards, it can be used as a master mode to build an independent network controller, or as a slave to other hosts MCUs to add networking capabilities to existing devices.ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals, and other IoT applications. It is an ideal solution for IoT applications.
Features:
Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
Low-power dual-core 32-bit CPU for application processors
Up to 240MHz, up to 600 DMIPS
Built-in 520 KB SRAM, external 4M PSRAM
Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
Support OV2640 and OV7670 cameras with built-in flash
Support for images WiFI upload
Support TF card
Support multiple sleep modes
Embedded Lwip and FreeRTOS
Support STA/AP/STA+AP working mode
Support Smart Config/AirKiss One-click distribution network
Support for serial local upgrade and remote firmware upgrade (FOTA)
Support secondary development
GY-271 HMC5883L Triple Axis Compass Magnetometer Sensor Module in Pakistan
The GY-271 module is based on the Honeywell HMC5883L IC for low-field magnetic sensing with a digital interface for applications such as lowcost compassing and magnetometry. The HMC5883L includes state-of-theart, high-resolution HMC118X series magneto-resistive sensors plus an ASIC containing amplification, automatic degaussing strap drivers, offset cancellation and a 12-bit ADC that enables.
Mq3 Alcohol Sensor Detector Gas Sensor Module In Pakistan
MQ3 MQ 3 MQ-3 Alcohol Detector Gas Sensor Module is a simple to use MQ-3 Alcohol Detector Gas Sensor Module which can sense the presence of Alcohol in the air. The module uses our MQ-3 sensor. It simplifies the interface to the odd pin spacing of the sensor and provides an interface through standard 4 x 0.1″ header pins. It provides an analog output corresponding to the concentration of the gas in the air and an easy to use digital output. The onboard potentiometer can be used to set the maximum gas concentration beyond which the digital output gets triggered. Just power the module with 5V set the threshold and you can start getting the gas concentration of the air around the sensor! An onboard LED signals the presence of any gas. Perfect sensing alcohol concentration on your breath just likes common breathalyzer.
mq3 alcohol sensor working
RS485 to TTL UART Converter Module Price in Pakistan
RS485 to TTL / TTL to RS485 converter is a module that allows the TTL interface of the microcontroller to be transferred to the RS485 module / MAX485 module. It is generally used for industrial automation. This module adds lightning protection design and anti-jamming design. When we use it in the field and carry out long distance transmission, we can Connect the GND end of the module to the ground so that lightning protection and anti-interference can be achieved. This Max485 to TTL module is online in Pakistan
Reviews
There are no reviews yet.