Arduino RPM Rotational Speed Measuring Sensor in Pakistan
Digital Tachometer RPM, Speed or Pulse counting Sensor Module. Can be used with Arduino, Raspberry Pi, and other microcontroller boards.
Applications
RPM Sensing, Speed Sensing
As Home and End limit sensor in CNC machines
Position Detection Sensor
Pulse counting
Features
Output state indicator LED (LED ON means No obstruction)
Power state indicator LED
3.3V and 5V logic level compatibility
4 pin standard male header for interfacing with electronics
A fixed hole for easy installation
Built in LM393 comparator for perfect non-intermediate logic low and high output
The use of quality coupler slot sensor
Technical Specifications
Operating voltage: 3.3V-5V
Maxim Output Drive: 15mA
Digital Output (DO) Output Low : When No Obstruction
Digital Output (DO) Output High: When Obstructed
Analog Output: Near 0V when no obstruction, between 0V and VCC when less obstruction and Near VCC when full Obstruction
Header Pitch: Standard 0.1 inch (2.54mm)
Grove width : 5mm
PCB Size: 3.2cm x 1.4cm
Mounting Hole Diameter: 3.0mm
Pinouts
VCC
GND
DO (Digital Out)
AO (Analog Out)
Package Includes
1x Digital Tachometer RPM or Speed Sensor Module – FZ0888
-25%
0%
ISD1820 Recording And Playback Module With On Board Mic And Loud Speaker Price in Pakistan
Original price was: ₨ 450.₨ 400Current price is: ₨ 400.
49E Hall Effect Module Digital + Analog Price in Pakistan
Original price was: ₨ 170.₨ 150Current price is: ₨ 150.
Arduino RPM Rotational Speed Measuring Sensor in Pakistan
Original price was: ₨ 200.₨ 150Current price is: ₨ 150.
Arduino RPM Rotational Speed Measuring Sensor in Pakistan
Digital Tachometer RPM, Speed or Pulse counting Sensor Module. Can be used with Arduino, Raspberry Pi, and other microcontroller boards
Description
Additional information
| Weight | 300 kg |
|---|
Reviews (0)
Shipping & Delivery
Related products
Ch340 Arduino Mega 2560 With Cable In Pakistan
The Mega 2560 is a micro-controller board base on the CH340. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything need to support the micro-controller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get start. The Mega is compatible with most shields design for the Duemilanove or Diecimila.
The Mega 2560 is an update to the Mega, which it replaces. The Mega2560 differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the CH340 programmed as a USB-to-serial converter.
Revision 2 of the Mega2560 board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU mode.
Esp32-cam Wifi + Bluetooth Camera Module Development Board Esp32 With Camera Module Ov2640 in Pakistan
SP32-CAM is a WIFI+ Bluetooth dual-mode development board that uses PCB on-board antennas and cores based on ESP32 chips. It can work independently as a minimum system.ESP integrates WiFi, traditional Bluetooth, and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture, main frequency adjustment range 80MHz to 240MHz, on-chip sensor, Hall sensor, temperature sensor, etc. Fully compliant with WiFi 802.11b/g/n/e/i and Bluetooth 4.2 standards, it can be used as a master mode to build an independent network controller, or as a slave to other hosts MCUs to add networking capabilities to existing devices.ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals, and other IoT applications. It is an ideal solution for IoT applications.
Features:
Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
Low-power dual-core 32-bit CPU for application processors
Up to 240MHz, up to 600 DMIPS
Built-in 520 KB SRAM, external 4M PSRAM
Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
Support OV2640 and OV7670 cameras with built-in flash
Support for images WiFI upload
Support TF card
Support multiple sleep modes
Embedded Lwip and FreeRTOS
Support STA/AP/STA+AP working mode
Support Smart Config/AirKiss One-click distribution network
Support for serial local upgrade and remote firmware upgrade (FOTA)
Support secondary development
Mq8 Hydrogen Gas Sensor Module In Pakistan
MQ8 MQ 8 MQ-8 Hydrogen Gas Sensor Module H2 Alarm Detection MQ-8 Sensor Hydrogen Gas Sensor Module H2 Alarm Detection use in clean air low conductivity tin oxide (SnO2). When there is the environment in which the combustible gas sensor, conductivity sensor with increasing concentration of combustible gases in air increases. Using a simple circuit to convert the change in conductivity of the gas concentration corresponding to the output signal. MQ-8 hydrogen gas sensor of high sensitivity, the monitoring of the other hydrogen-containing gas is also very satisfactory. This sensor can detect a wide range of hydrogen gas, city gas, in particular, is a low-cost sensor for a variety of applications.
RS485 to TTL UART Converter Module Price in Pakistan
RS485 to TTL / TTL to RS485 converter is a module that allows the TTL interface of the microcontroller to be transferred to the RS485 module / MAX485 module. It is generally used for industrial automation. This module adds lightning protection design and anti-jamming design. When we use it in the field and carry out long distance transmission, we can Connect the GND end of the module to the ground so that lightning protection and anti-interference can be achieved. This Max485 to TTL module is online in Pakistan
USB to RS485 / USB 2.0 to RS 485 Serial Converter Adapter Price in Pakistan
The USB to RS485 Converter Adapter module support WIN7 XP Vista Linux Mac OS provides an easy-to-use RS485 interface by means of a Virtual Com Port on the user’s system. There are no command structures, whatever is sent to the Virtual Comm Port is automatically converted to RS485 and vice versa. The module is completely self-powered from the USB bus. Controlling / Communicating with RS-485 devices from your PC has never been easier! This device is plug-and-play. It shows up as a serial/com port and is accessible from applications or hyper-terminal.
Reviews
There are no reviews yet.