25kg Servomotor Digital TD-8125MG Price in Pakistan

Driver IC: PCA9685; Adjustable frequency PWM up to about 1.6 kHz; 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate; Reverse polarity protection on the terminal block input Configurable push-pull or an open-drain output; The output enable pin to quickly disable all the outputs; Terminal block for power input; Green power-good LED 3 pin connectors in groups of 4 so you can plug in 16 servos at once; Chainable design; A spot to place a big capacitor on the V+ line220-ohm series resistors on all the output lines to protect them, and to make driving LEDs trivial.; This board/chip uses an I2C 7-bit address between 0x60-0x80, selectable with jumpers Dimension:- Length: 62mm; Width: 25mm; Height: 15mm; Weight: 10gm Packaged by:- Sharvi Technologies (OPC) Pvt. Ltd.; Address:- #09, CK Nagar, AECS layout, Hosa Road, Bangalore-560100

he module consists of a stepper motor driver plus a motor directly connectable to the module. The use of this module is the stepper motor connection also known as step-by-step; A stepper motor is a motor that moves in discrete steps (single step). Rotation occurs thanks to a specific sequence of impulses of constant amplitude and time applied to its inputs. 5V Stepper Motor 28BYJ-48 With Drive Test Module Board ULN2003 5 Line 4 Phase 5 Line 4 phase can be driven by ordinary uln2003 chip can also be connected in phase 2 development board used for. supporting the use of a direct plug and easy to use stepper motor used in the development board

MG945 MG945 Towerpro Digital Metal Servo 12KG High torque MG945 is for 1/8 buggy monster and many RC model. It is low cost of digital servo with export quality and great servo for just about any application. Specification: Weight: 55g Dimension: 40.7×19.7×42.9mm Stall torque: 10kg/cm (4.8v); 12kg/cm (6v) Operating speed: 0.23sec/60degree (4.8v); 0.2sec/60degree (6.0v) Operating voltage: 4.8 ~ 6.6v Temperature range: 0- 55deg Gear Type: Metal gear Dead band width: 1us Power Supply: Through External Adapter servo wire length: 32cm Current draw at idle 10MA No load operating current draw 170MA Stall current draw 1200MA Servo Plug: JR (Fits JR and Futaba) servo arms &screws included and fit with Futaba servo arm It’s universal “S” type connector that fits most receivers, including Futaba, JR, Hitec ,GWS, Cirrus, Blue Bird, Blue Arrow, Corona, Berg, Spektrum. CE &RoHS approved We have upgraded our servo gear set and shaft to aluminum 6061-T6. It is stronger and lighter than copper.