- Product Name : Crystal Oscillator;Frequency : 22.1184MHz;Frequency Tolerance : ±20ppm
- Load Capacitance : 20PF;Frequency Stability : ± 20ppm;Mounting Type : DIP
- No. of Pins : 2;Effective Series Resistance : 30 ohm;Mount Height : 3mm
- Mount Size : 10.5 x 4.2mm;Pin Length : 13mm;Material : Metal & Electronic Parts
-22%
12MHz Crystal Oscillators DIP-14 4-Pin /Quarz-Oszillatoren Price in Pakistan
Original price was: ₨ 450.₨ 375Current price is: ₨ 375.
8mhz 2pin crystal oscillator Price in Pakistan
Original price was: ₨ 80.₨ 70Current price is: ₨ 70.
22.1184MHz HC-49S DIP Crystal Oscillator Crystals Low Price in Pakistan
Original price was: ₨ 90.₨ 70Current price is: ₨ 70.
Description
Reviews (0)
Shipping & Delivery
Related products
32.768 KHz Crystal Oscillator Price in pakistan
This is a 32.768 MHZ Crystal. This is a low cost crystal oscillator with oscillation frequency of 32.768 MHZ. Crystal are normally required to provide clock pulses to your micro-controller or other ICs which require external clock source. An oscillator crystal has two electrically conductive plates, with a slice or tuning fork of quartz crystal sandwiched between them. The crystal oscillator circuit sustains oscillation by taking a voltage signal from the quartz resonator, amplifying it, and feeding it back to the resonator. Quartz has the further advantage that its elastic constants and its size change in such a way that the frequency dependence on temperature can be very low.
4Mhz Crystal Oscillator
18pF of Load Capacitance
Frequency Tolerance(Ƹf/f) range is ± 30ppm
Frequency Temperature Stability range is ±50ppm
Resonance Resistance 40ohms (max)
Oscillation mode: Fundamental mode
Shunt Capacitance less than 7pF
Drive Level less than 100µW
Operating Temperature Range: -20 to + 70°C
Operable Temperature Range: -25 to + 85°C
Storage Temperature Range: -55 to + 125°C
Insulation Resistance: 500 M ohms
Crystal Oscillator 20 MHz in Pakistan
20 Mhz frequency
Load capacitance: 20pF.
Frequency tolerance: +/-20 ppm
Best for micro-controller based projects done in school and colleges.
Works best with any kind of micro-controllers.
Standard frequency crystals – use these crystals to provide a clock input to your microprocessor.
It provide clock pulses of 20 Mhz frequency. It can be used as UART clock.
It allows integer division to common baud rates (96?115200 baud or 96?96?1,200 baud).
It is a common clock for AVR microcontroller It uses the mechanical resonance of a vibrating crystal of
piezoelectric material to create an electrical signal with a very precise frequency.
Load capacitance: 20pF.
Frequency tolerance: +/-20 ppm.
Color: Silver
Reviews
There are no reviews yet.