-17%
360 product view
    Click to enlarge
    AC 220V PIR Motion Sensor PIR Detector Infrared Motion Sensor Original price was: ₨ 750.Current price is: ₨ 600.
    Back to products
    Bldc Motor A2212 930kv Outrunner Brushless Dc Motors For Rc Helicopter Quadcopter Original price was: ₨ 1450.Current price is: ₨ 1200.

    1000KV A2212 Brushless DC Motor BLDC Rotor for Quadcopter Drone

    Original price was: ₨ 1450.Current price is: ₨ 1200.

    KV (rpm/volt): 1000
    Thrust: 900/4
    Efficiency : 80%
    efficiency current: 4-10A (>75%)
    Current capacity : 12A/60s
    Load current @10v: 0.5A
    Working voltage: 7-12V

    Compare
    Add to wishlist
    Category:
    Description

    1000KV A2212 Brushless DC Motor BLDC Rotor for Quadcopter Drone
    This is a brushless outrunner motor specifically made for quadcopters and multirotors. It is a 1000kV motor. It provides high performance, super power and brilliant efficiency. These motors are perfect for medium size quadcopters with 8 inch to 10 inch propellers. Use this to build powerful and efficient quadcopters.
    The comes complete with mounting bolts, prop adapters and power leads. It can be used with our F450 quadcopter frame. Our 30A ESCs can be used to drive the motor.

    Features:
    Model: A2212 10T
    Motor KV (RPM/V): 1400
    Maximum Efficiency: 80%
    Current Capacity: 16A Per 60S
    No-Load Current(A): 0.7A @10V
    Max. Efficiency Current: 6-12A
    Maximum Watts(W): 180
    Internal Resistance(mΩ): 65
    Poles: 14
    Shaft Diameter (mm): 3.17
    LiPO Batteries: 2S-3S
    Length (mm): 27.5
    Width (mm): 26.5
    Weight (gm): 62
    Package Included:
    1x Propeller Adaptor

    1x Motor Mount

    1 set of Mounting Screws

    Reviews (0)

    Reviews

    There are no reviews yet.

    Be the first to review “1000KV A2212 Brushless DC Motor BLDC Rotor for Quadcopter Drone”

    Your email address will not be published. Required fields are marked *

    Shipping & Delivery
    wd-ship-1
    wd-ship-2

    MAECENAS IACULIS

    Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

    ADIPISCING CONVALLIS BULUM

    • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
    • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
    • Diam parturient dictumst parturient scelerisque nibh lectus.

    Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

    Related products

    -14%
    Compare

    10A 12V-40V DC Motor Speed Controller 12V 24V PWM Variable Speed Regulator

    Original price was: ₨ 700.Current price is: ₨ 600.
    Input Voltage: DC 12V-40V Control Power: 0.01-400W Rated Current: 8A Maximum Current: 10A Static Current: 0.02A(standby status) Frequency: 13kHz Speed Adjustment Range: 10%-100% Hole Diameter: 3.2mm Operating Temperature: -20℃~125℃ Dimensions: 75*60*28mm / 2.95*2.36*1.10in Package Weight: Approx. 73g/2.6oz
    Add to wishlist
    Add to cart
    Quick view
    -25%
    Compare

    16 Channel Servo Motor Driver Pca9685 12 Bit Pwm I2c Module For Arduino

    ,
    Original price was: ₨ 1000.Current price is: ₨ 750.
    Driver IC: PCA9685; Adjustable frequency PWM up to about 1.6 kHz; 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate; Reverse polarity protection on the terminal block input Configurable push-pull or an open-drain output; The output enable pin to quickly disable all the outputs; Terminal block for power input; Green power-good LED 3 pin connectors in groups of 4 so you can plug in 16 servos at once; Chainable design; A spot to place a big capacitor on the V+ line220-ohm series resistors on all the output lines to protect them, and to make driving LEDs trivial.; This board/chip uses an I2C 7-bit address between 0x60-0x80, selectable with jumpers Dimension:- Length: 62mm; Width: 25mm; Height: 15mm; Weight: 10gm Packaged by:- Sharvi Technologies (OPC) Pvt. Ltd.; Address:- #09, CK Nagar, AECS layout, Hosa Road, Bangalore-560100
    Add to wishlist
    Add to cart
    Quick view
    -23%
    Compare

    65mm Smart Robot Car Tyres Wheel for Gear Motor (Yellow)

    ,
    Original price was: ₨ 130.Current price is: ₨ 100.
    This is 65mm Robot Wheel for Smart Robo Car Motor Chassis(Yellow). The wheel is made up of high-quality rubber which gives maximum traction while operating. The wheel is strong and sturdy as it features a nylon reinforced plastic rim. Features: Car hub is reinforced nylon, very sturdy. Tire with sponge liner for more strength With upgraded tire tread for greater friction New design wheel for better combination with the motor
    Add to wishlist
    Add to cart
    Quick view
    -8%
    Compare

    Dual DC Motor Driver TB6612FNG For Arduino

    ,
    Original price was: ₨ 600.Current price is: ₨ 550.
    Power supply voltage: VM = 15 V(Max). Output current: IOUT=1.2 A(ave) / 3.2 A (peak). Output low ON resistor: 0.5Ω (VM ≥ 5 V). Built-in thermal shutdown circuit and low voltage detecting circuit. Thermal Shutdown Circuit. Heat Radiation Design. Back-EMF protection.
    Add to wishlist
    Add to cart
    Quick view
    -22%
    Compare

    IBT2 Motor Driver H-Bridge BTS7960 43A High Power Module

    ,
    Original price was: ₨ 1800.Current price is: ₨ 1400.
    High current: The BTS7960 can handle up to 43A of peak current and 36A of continuous current. Low on-resistance: The BTS7960 has a low on-resistance of 16mΩ, which helps to minimize power dissipation. Low quiescent current: The BTS7960 has a low quiescent current of 7µA, which helps to extend battery life. Integrated driver IC: The BTS7960 includes an integrated driver IC that provides logic level control, current sense, slew rate limiting, dead time generation, and protection against overtemperature, overvoltage, undervoltage, overcurrent, and short circuit. IBT2 Motor Driver Specifications : – BTS7960 43A provides a cost optimized solution for protected high current PWM motor drives with very low board space consumption. The 43a motor driver IBT-2 H-bridge module is an inexpensive, high power motor driver based on two BTS7960 chips. If you are looking for a high-performance, low-cost, and easy-to-use motor driver, the IBT2 H-Bridge is a great option. Here are some of the specifications of the IBT2 H-Bridge: Input voltage: 6V to 27V Maximum current: 43A Control input level: 3.3V to 5V Control mode: PWM or level Working duty cycle: 0 to 100% Over-voltage lockout Under-voltage shutdown Board size (L x W x H): 50mm x 50mm x 43mm Weight: ~66g
    Add to wishlist
    Add to cart
    Quick view
    -14%
    Compare

    MG90S Metal Gear Micro Servo Motor in Pakistan

    ,
    Original price was: ₨ 500.Current price is: ₨ 430.
    Features: Weight 9 grams. Dimension: 22.2 x 11.8 x 31 mm approx Stall torque: 1.8 kgf·cm. Operating speed: 0.1 s/60 degree. Operating voltage: 4.8 V (~5V) Working Torque: 2kg/Cm Reaction Speed: 0.11 Seconds / 60 Degrees (4.8v) Operating Temperature: 0 -55 The Deadband Setting: 5 Microseconds Plug Type: Jr, Futaba General Rotation Angle: 180 Degrees Servo: Analog Servo Operating Voltage: 4.8v Structural Material: Copper Metal Teeth, Coreless Motor, Double Ball Bearing
    Add to wishlist
    Add to cart
    Quick view
    -11%
    Compare

    Mg946r Mg946 r 180 Degree Metal Gear Servo Motor

    ,
    Original price was: ₨ 950.Current price is: ₨ 850.
    MG946R MG946 R 180 Degree Metal Gear Servo Motor In Pakistan MG946R Digital RC Servo Motor Metal Gear Torque 13Kg for Arduino/Raspberry-Pi/Robotics. MG946R Towerpro Digital Metal Servo 13KG High torque. It is upgraded version of TowerPro MG945. The new PCB and IC control system which makes it more accurate. Its internal gearing and motor are also upgraded to improve dead bandwidth and centering. MG946R is for 1/8 buggy monster and many RC model. It is an original equipment manufacturer (OEM product) of TowerPro MG995 servo. There are many counterfeit servos of TowerPro from China dealers selling on eBay, Amazon and Alibaba websites. If the suppliers removed “TowerPro” logo from the photos and the products description, they are selling counterfeits low quality servo.
    Add to wishlist
    Add to cart
    Quick view
    -11%
    Compare

    Mg996r Metal Gear Servo Motor 180 Degree Servo Motor For Arduino

    Original price was: ₨ 950.Current price is: ₨ 850.
    perating Voltage is +5V typically Current: 2.5A (6V) Stall Torque: 9.4 kg/cm (at 4.8V) Maximum Stall Torque: 11 kg/cm (6V) Operating speed is 0.17 s/60° Gear Type: Metal Rotation : 0°- 360° Weight of motor : 55gm Package includes gear horns and screws
    Add to wishlist
    Add to cart
    Quick view