ESP32 C5-DevKitC-1 in Pakistan

This Pro Micro 5V 16M Mini Leonardo Micro-controller Development Board For Arduino development board has 4 channel 10 bit ADC, 5 PWM pins, 12 DIO, and a hardware serial connection Rx and Tx you are familiar with. Running on 16MHz and 5V, this board will remind you a lot of other Arduino compatible boards that you like. There is a voltage regulator on board, so it can accept up to 12V DC.

The ESP 01 or ESP8266 WiFi Module is a self-contained SOC. ESP8266 serial module has integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. The esp8266 wifi module Arduino is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor. Each ESP8266 module comes pre-programmed with an AT command set firmware, meaning, you can simply hook this up to your Arduino device and get about as much WiFi-ability as a WiFi Shield offers (and that’s just out of the box)! The esp 01 connect to wifi module is an extremely cost-effective board with a huge, and ever-growing, community.

Features Of WEMOS D1 Mini Pro: 11 digital input/output pins Interrupt/PWM/I2C/one-wire 1 analog input(3.2V max input) 4M byte Flash External antenna connector Built-in ceramic antenna New CP2104 USB-TO-UART IC Same size as D1 mini, but more light Specification Microcontroller ESP-8266EX Operating Voltage 3.3V Digital I/O Pins 11 Analog Input Pins 1(Max input: 3.2V) Clock Speed 80MHz/160MHz Flash 4M bytes Length 34.2mm Width 25.6mm Weight 2.5g NOTE: All of the IO pins have interrupt/PWM/I2C/one-wire support except D0, All of the IO pins run at 3.3V. Package 1 x D1 Mini Pro V1.1.0 1 x Set of header pins Downloads: Click me For Drivers OF WeMos D1 Mini Pro Package includes: 1x WEMOS D1 Mini Pro module 2x 20-pin headers (customer can cut small piece as needed) 1x Antenna 1x ipx Connector