Electrical Specification
Working voltage range: 4.8-8.4V
No load speed：0.32sec/60°(4.8V), 0.22sec/60°(8.4V)
Runnig current：40mA(4.8V), 200mA(8.4V)
Peak stall torque: 32.7kg.cm(4.8V), 35.2kg.cm(8.4V)
Stall current: 2800mA±10%(4.8V), 3800mA±10%(8.4V)
Mechanical Specification
Size: 40.0*20.5*40.5mm
Weight: 56g±5%
Gear type: 5 Metal
Limit angle: 180°
Bearing: 2BB
Horn type: Plastic, POM
Case: Engineering plastics(PBT)+Aluminum alloy
Connector wire: 320mm±5mm
Motor: Carbon brush motor
Splash water resistance: yes
Control Specification
Command signal: Pulse width modification
Amplifier type: Digital controller Pulse width range: 500～2500usec
Neutral position: 1500usec
Running degree: 180°±3°(when 500～2500usec)
Dead band width: 5 usec
Rotating direction: Counterclockwise (when 1000～2000usec)
Storage Temperature Range: -30°C～80°C
Operating Temperature Range: -25°C～70°C
-10%
0%
30kg Servo moter TD-8130MG Waterproof Price in Pakistan
Original price was: ₨ 5500.₨ 5300Current price is: ₨ 5300.
MAX7219 Dot LED Matrix 4×1 Module MCU Control Unit Price in Pakistan
Original price was: ₨ 1300.₨ 1200Current price is: ₨ 1200.
35KG METAL SERVO 180º TD-8135MG Price in Pakistan
Original price was: ₨ 6500.₨ 5870Current price is: ₨ 5870.
Description
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
65mm Smart Robot Car Tyres Wheel for Gear Motor (Yellow)
This is 65mm Robot Wheel for Smart Robo Car Motor Chassis(Yellow).
The wheel is made up of high-quality rubber which gives maximum traction while operating. The wheel is strong and sturdy as it features a nylon reinforced plastic rim.
Features:
Car hub is reinforced nylon, very sturdy.
Tire with sponge liner for more strength
With upgraded tire tread for greater friction
New design wheel for better combination with the motor
Dc 3v 6v Dc Gear Motors In Pakistan
This gear motor wheel is perfect for your next robotics project. This gearbox is ideal for robotic cars or line-tracing robots. With plastic construction and colored in bright yellow, the DC gear motor measures approx. 2.5 inches long, 0.85 inches wide, and 0.7 inches thick. The wheel can be mounted on either side and the Gearmotor works well between 4V to 7V (recommended 6 Volts). At a ratio of 1:48, you can get some really good torque at 5 Volts.
Motor Specifications
Operating voltage: 3V ~ 6V DC (recommended value 5V)
Maximum torque: 800g.cm
Speed without load: 90x10rpm
Reduction ratio: 1:48
No Load current: 190mA(max.250mA)
Stall Current: ~1A
Strong anti-interference on this motor keeps it safe around micro-controllers
DC 5V-35V 5A 20khz LED PWM DC Motor Controller Speed Regulation Dimmer
DC 5V-35V 5A 20khz LED PWM DC Motor Controller Speed Regulation Dimmer
Features:
Mini DC 3-35V 5A PWM Motor Speed Controller. Wide voltage DC motor speed controller, PWM duty cycle: 1% -100%.
Mini Style DC Motor Speed Regulator controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM).
Default disconnection of short circuit point, suitable for 5-35V input.
Manually connect the short circuit point according your needs, suitable for low power 3-15v input.
By screwing the potentiometer, you can turn off power supply output. High voltage and high current resettable fuse, overcurrent automatic disconnection, power off for cooling for a few seconds fuses automatic recovery.
Precautions:
DC motor governor input is DC, can not directly connected to the AC (for example: home 220V AC), otherwise it will burn!
DC power supply positive and negative terminals do not reverse, otherwise the governor may be damaged.
The motor can be positive or negative, when the direction of operation and expectations do not match, you can adjust the line order to change the direction.
Adjust the potentiometer knob to change the governor output duty cycle, the motor speed changes.
Size: 30mm x 26mm x 14mm (Without Handle)
Package Includes:
1 x 5V-35V Speed Control Switch
MG945 Servo Moter in Pakistan
MG945
MG945 Towerpro Digital Metal Servo 12KG High torque
MG945 is for 1/8 buggy monster and many RC model.
It is low cost of digital servo with export quality and great servo for just about any application.
Specification:
Weight: 55g
Dimension: 40.7×19.7×42.9mm
Stall torque: 10kg/cm (4.8v); 12kg/cm (6v)
Operating speed: 0.23sec/60degree (4.8v); 0.2sec/60degree (6.0v)
Operating voltage: 4.8 ~ 6.6v
Temperature range: 0- 55deg
Gear Type: Metal gear
Dead band width: 1us
Power Supply: Through External Adapter
servo wire length: 32cm
Current draw at idle 10MA
No load operating current draw 170MA
Stall current draw 1200MA
Servo Plug: JR (Fits JR and Futaba)
servo arms &screws included and fit with Futaba servo arm
It’s universal “S” type connector that fits most receivers, including Futaba, JR, Hitec ,GWS, Cirrus, Blue Bird, Blue Arrow, Corona, Berg, Spektrum.
CE &RoHS approved
We have upgraded our servo gear set and shaft to aluminum 6061-T6.
It is stronger and lighter than copper.
MG995 12 kg Servo Motor in Pakistan
Operating Voltage: 4.8V – 7.2V
Torque: 10kg/cm (4.8V), 13kg/cm (6V), 15kg/cm (7.2V)
Speed: 0.20 sec/60° (4.8V), 0.16 sec/60° (6V), 0.14 sec/60° (7.2V)
Operating Temperature Range: -10°C to 50°C
Weight: 55g
Dimensions: 40.7 x 19.7 x 42.9 mm
Rotation: 360 degrees continuous
Gear Material: Metal
Bearing Type: Dual Ball Bearing
Connector Type: Universal
Compatibility: Standard servo pulse width (1,000μs to 2,000μs)
Reviews
There are no reviews yet.