PWM to Voltage Converter Module 0-100% to 0-10V for PLC MCU Digital to Analog Signal
The PWM transfer voltage module LC-LM358-PWM2V converts the PWM digital signals into 0 to 10V analog signals.
It can be used as signal interface switching for PLC or other industrial control boards. The output voltage is regulated by adjusting the duty ratio of the PWM. The modules are small in size and easy to use in different places.
Features:
MCU embedded technology
Easy to operate, fine tuned by potentiometer
Select the PWM signal input level range through short-circuit
The module is smaller, easy to carry and use
Parameter:
Work Voltage: DC 12V-30V; (> 100MA)
PWM Receiver Frequency: 1KHZ-3KHZ
PWM signal input level range:
The peak of 4.5V to 10V level. The short cap install in ‘5V’. This level is used for normal controller or 5V MCU
The peak of 12V to 24V level, so inserted in 24V. The short cap install in ‘24V’. This level is used for normal PLC controller
Conversion range: 0%-100% PWM to 0-10V
Allowable error: 5%
Pin Definition:
VCC -Working power 12-30V
GND -Ground
PWM – Input PWM signal positive
GND -Input voltage ground
VOUT-Output voltage: 0-10V
GND – Output ground
Reviews
There are no reviews yet.