Low Power Consumption Minimizes Thermal Dissipation, Reducing System Cost
120µA to 500µA Quiescent Current
Shutdown Current of 0.1µA
Single 5V Supply Voltage
Slew-Rate-Limited Drivers (MAX483/MAX487/MAX488 and MAX489)
Up to 250kbps Data Rate
Unlimited Drivers: Up to 2.5Mbps Data Rate
Integrated Protection Enhances System Robustness
Short Circuit Current Limited Driver
Integrated Thermal Shutdown
Receiver Fail-Safe for Input Open Circuit
Guarantees Logic High
1/4 Unit Loading (MAX487/ MAX1487 only) Allows Up to 128 Devices on a Single Bus
48kΩ Receiver Input Resistance
-20%
Max485 Csa Smd Ic Low-power, Slew-rate-limited Transceiver
Original price was: ₨ 100.₨ 75Current price is: ₨ 75.
MAX487 IC Price in Pakistan
Original price was: ₨ 120.₨ 90Current price is: ₨ 90.
Max485 IC
Original price was: ₨ 100.₨ 80Current price is: ₨ 80.
The Max485 IC is a low-power transceiver for RS-485 and RS-422 communication. Each part contains one driver and one receiver. The MAX483, MAX487, MAX488, and MAX489 feature reduced slew-rate drivers that minimize EMI and reduce reflections caused by improperly terminated cables, thus allowing error-free data transmission up to 250kbps. The driver slew rates of the MAX481, MAX485, MAX490, MAX491, and MAX1487 are not limited, allowing them to transmit up to 2.5Mbps
Description
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
7414 74ls14 Schmitt Trigger Hex Inverter Ic In Pakistan
The 74LS14 Schmitt Trigger Hex Inverter IC is widely used in the following applications:
Noise Removal: Cleans up noisy signals in circuits, ensuring reliable digital operation.
Signal Conditioning: Used to sharpen slow input signals, making them suitable for digital logic systems.
Power Meters and Power Analyzers: In power measurement devices, the Schmitt trigger helps in ensuring stable, noise-free signal processing.
Signal Converters: Converts slow or noisy analog signals into clean digital signals.
Digital Systems: Used in systems requiring high noise immunity and stable, clean logic transitions.
Package Includes:
1 x 74LS14 Schmitt Trigger Hex Inverter IC (DIP-14)
Buy 74LS14 Schmitt Trigger Hex Inverter IC in Pakistan
G
Atmega16 Atmega 16A PRICE
The ATmega16A is a low-power CMOS 8-bit microcontroller based on the Atmel AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega16A achieves throughputs approaching 1MIPS per MHz allowing the system designer to optimize power consumption versus processing speed.
Atmega8l Atmega8 28pin Microcontroller
The ATMega8 Microcontroller AVR core combines a rich instruction set with 32 general-purpose working registers. All 32 registers are directly connected to the Arithmetic Logic Unit (ALU), allowing two independent registers to be accessed in one single instruction executed in one clock cycle. The resulting architecture is more code efficient while achieving throughputs up to ten times faster than conventional CISC microcontrollers.
The ATmega8 provides the following features: 8 Kbytes of In-System Programmable Flash with Read-While-Write capabilities, 512 bytes of EEPROM, 1 Kbyte of SRAM, 23 general purpose I/O lines, 32 general purpose working registers, three flexible Timer/Counters with compare modes, internal and external interrupts, a serial programmable USART, a byte-oriented Twowire Serial Interface, a 6-channel ADC (eight channels in TQFP and QFN/MLF packages) with 10-bit accuracy, a programmable Watchdog Timer with Internal Oscillator, an SPI serial port, and five software selectable power saving modes. The Idle mode stops the CPU while allowing the SRAM, Timer/Counters, SPI port, and interrupt system to continue functioning.
PIC 18F46K22
Sleep mode: 100 nA, typical
Watchdog Timer: 500 nA, typical
Timer1 Oscillator: 500 nA @ typical 32 kHz Flexible Oscillator Structure
Precision 16 MHz internal oscillator block:
Factory calibrated to 1%
Software selectable frequencies range of 31 kHz to 16 MHz
64 MHz performance available using PLL
No external components required
Four Crystal modes up to 64 MHz
Two external Clock modes up to 64 MHz
4X Phase Lock Loop (PLL)
Secondary oscillator using Timer1 @ 32 kHz
Fail-Safe Clock Monitor: Allows for safe shutdown if peripheral clock stops
Two-Speed Oscillator Start-up
Reviews
There are no reviews yet.