Applications of 150W DC-DC Boost Converter :
Run Laptop on DC12V Car battery. (Laptops usually require 17V – 18V DC.)
Run Communication equipment on a single 12V lead-acid battery that is rated for operation at 24V to 35V
Run Higher voltage (24V – 35V) DC motors also used in Robots using single 12V batteries
Technical Specifications:
Input Voltage: 10v – 32v DC
Output Voltage: 12v – 35v DC
Output Current: 6A MAX
Input Current: 10A (MAX)
Output Ripple: 2% MAX
Working Temperature: Industrial – 40C to +85C (Environmental temperature, more than 40C, reduce load wattage or enhance cooling)
Full-Load temperature: 45 degrees.
No-load current: 25mA typical.
Voltage regulation: ± 0.5%.
Load regulation: ± 0.5%.
Dynamic response speed: 200uS 5%.
Short circuit protection: None (Please Install fuses and protection circuits at the Input port.)
Input Reverse Polarity Protection: None (Please Series diode at the input port.)
Size: 2.60 in (L), 1.85 in (W) , 1.1 in (H)
Weight: 2.30 oz (66 g)
[!] Warnings
Do NOT limit current, also do not overload!
Although The maximum rated values should NEVER be continuous from the load or else the module will be damaged.
Be sure to install correct circuit protection, such as fuses, to the input of the module to avoid overloading and the potential for fire.
Please enhance heat dissipation above 50W
Hence Failure to take these precautions and incorrect use of this module may result in damage, fire, and/or personal injury.
Documents and Downloads
UC3844 Current mode PWM controller Datasheet
UC3844 Based Boost Converter Schematics
Package Includes
1x OSKJ 150W DC-DC Boost Converter 10-32V to 12-35V – 6A Output module
Documents and Downloads
UC3844 Current mode PWM controller Datasheet
UC3844 Based Boost Converter Schematics
Package Includes
1x OSKJ 150W DC-DC Boost Converter 10-32V to 12-35V – 6A Output module
-14%
0%
XL6009 Digital DC-DC Step Up Boost Converter 5 – 32V to 5 – 35V 10W (4A)
Original price was: ₨ 500.₨ 450Current price is: ₨ 450.
Cc-cv Xl4016 9a Dc To Dc Adjustable Buck Converter
Original price was: ₨ 950.₨ 850Current price is: ₨ 850.
150w Dc To Dc Boost Converter 10 32v To 12 35v 6a Step Up Power Supply Module
Original price was: ₨ 700.₨ 600Current price is: ₨ 600.
This 150W DC-DC Boost Converter 10-32V to 12-35V module allows you to step up an input voltage as low as 10V and set the output to 12V-35V. The output voltage will be higher than the input voltage. In addition the boost converter design is based on popular Texas Instrument’s UC3844 current mode PWM controller chip.
| Weight | 300 kg |
|---|
Description
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
2in1 DC 0-100V Voltmeter Ammeter With DC 100A 75mV Ampere Shunt Dual 0.28″ Red Blue Voltage Detector Current Indicator
Power Supply (Measure Voltage): DC 4.5-30V
Measure Voltage Range:0-100v
Measure voltage < 10V,Min Resolution: 0.01V
Measure voltage >10V, Min resolution: 0.1V
Measure Current: 100A forward current ( more than 10A need shunt)
Current Resolution: 0.01A
Operating Current: <20mA
Display: 0.28 "LED monochrome（red and red)
Dimensions: 48 x 29 x 21 mm
Cutting Size: 45 x 26 mm
Measurement rate: ≥ 500mS / times
Accuracy: 1% (± 1 digit )
Operating Temperature: -10°c ~ +65°c
Operating Humidity: 10 ~ 80% (non-condensing)
Working pressure: 80 ~ 106kP
5V 1A Power Bank Charger Step Up Boost Charging Circuit Module Lithium Battery DIY Power Bank Module in Pakistan
This is the mobile power module Accessories, 18650 Circuit board shell. Meet the individual needs of your DIY, but you must understand basic electronic assembly. The use of the positive B + and b-negative welding note cannot be canceled Batteries: polymer battery 18650 lithium battery cell phone battery Tablet battery MP3 battery can be connected to a lithium battery can also be connected in several sections of lithium batteries, as long as the voltage is 3.7-4.2 V in parallel
Przetwornica step-up 4V-36V 10W 2A XL6007
Przetwornica podwyższająca napięcie typu step-up na układzie XL6007 pozwalająca z napięcia wejściowego w zakresie od 4V do 24V wygenerować napięcie na wyjściu między 4V a 36V.
Posiada wygodną regulację napięcia wyjściowego potencjometrem. Ma kompaktowe wymiary.
Specyfikacja:
podwyższająca typ step-up
napięcie wejściowe od 4V do 24V
napięcie wyjściowe od 4V do 36V
maksymalna moc 10W
maksymalny prÄ…d 2A
wymiary 30mm x 15mm x 10mm
QC MOBILE POWER BOOST MODULE 5V 2.4A CHARGER CIRCUIT BOARD LCD DISPLAY
nput charging voltage: DC 5V 1A
2>.Input battery voltage:DC 3.7V-4.2V Polymer Rechargeable Lithium Battery
3>.Input type:Type-C/MicroUSB/Lighting
4>.Output channel:2CH
5>.Output voltage:5V2.4A
6>.Operating Temperature:-20℃~85℃
7>.Operating Humidity:5%~95%RH
8>.Module Size:68*27*11mm
Feature:
1>.Support discharge while charging
2>.Support dual USB output
3>.Support 3kinds input type
4>.Support QC fast charge
5>.Support display screen
XH-M603 Battery Charge Controller Module
Quick specifications of the HW-632 (XH-M603) module (copied from the seller’s page) are:
Input Voltage: DC 10V to 30V
Display Precision: 0.1V
Control Precision: 0.1V
Voltage Tolerance: ±0.1V
Output Type: Direct Output
Battery Voltage: 12V to 24V
Dimension(mm): 82 x 58 x 18
It accomplishes this with a small microcontroller, two voltage regulator chips, a bunch of discrete components, two microswitches, a PCB screw terminal block, an electromagnetic relay, one red LED and a 3-digit LED display. All in all, it looks like a compact module.
Below you can see an annotated figure of the HW-632/XH-M603 module.
XL4015 5A Step Down Module with Digital Voltmeter
XL4015 5A Step Down Module with Digital Voltmeter
The module comes equipped with a voltmeter, ammeter, power meter, and a USB interface for charging digital products.
A buck converter or step-down converter is a DC-to-DC converter that steps down voltage (while stepping up current) from its input (supply) to its output (load). It is a class of switched-mode power supply. This product is a 180 KHz fixed frequency PWM buck (step-down) DC/DC module, capable of driving a 5A load with high efficiency, low ripple, and excellent line and load regulation. The module with a voltage meter to display the input voltage and output voltage, and the voltage can be corrected through the button to improve the accuracy of the voltmeter
Reviews
There are no reviews yet.