-23%
360 product view
    Click to enlarge
    2 Button Delay Timer Relay Module 12v Dc Adjustable Timer Relay Module In Pakistan Original price was: ₨ 800.Current price is: ₨ 600.
    Back to products
    1 Channel Solid State Relay Module SSR Module For Arduino Original price was: ₨ 400.Current price is: ₨ 350.

    1 Channel Relay Module For Arduino

    Original price was: ₨ 175.Current price is: ₨ 135.

    Features of 1 Channel 5 Volts Arduino Relay Module:
    With isolation groove in the control area and load area.
    With power and relay action indication, bright when connect and go off when disconnects.
    When there is a signal in signal input, public side and the common side will break over.
    It can be not only used as a microcontroller development board module but also as a home appliance control.
    It can not only control the DC or AC signal but the 220V AC load.
    With a permanent open and close vents contact.
    It is convenient to connect with blue KF301 terminal access control cable.
    Specification of Single One Channel 5V Best Arduino Relay Module:
    VCC: Power interface,5V
    GND: Ground
    IN: Control interface.
    Drive Current: At least 4mA
    COM: Control circuit ground, connect to GND
    Size: approx. 41 x 16 x 16mm/ 1.61 x 0.62 x 0.62”
    Weight: Approx. 12g
    Package Includes:
    1 x 1 Channel 5V Arduino Relay Module
    Best Online Shopping website for 1 Channel 5V Arduino Relay Module Single One Channel 5 Volts Relay Module For Arduino in cheap price in Karachi, Lahore, Islamabad, Rawalpindi, Sukkur, Peshawar, Multan, Quetta, Faisalabad and all over Pakistan.

    Compare
    Add to wishlist
    Categories: ,
    Description

    1 Channel 5V Arduino Relay Module for Arduino PIC AVR DSP ARM. Single-channel relay, a wide range of microcontrollers such as Arduino, AVR, PIC, ARM and so on can control it.

    The 5V relay module circuit, each one needs 15mA-20mA driver current and equipped with high current relay: DC 30V / 10A, AC 250V / 10A. This one channel module has a standard interface that can be compatible with a microcontroller.

    This 5V Arduino relay module has on the high level and low level-trigger mode, friends who do not understand, have a look high-level trigger refers to the signal voltage between input and trigger, can be understand as a signal input with VCC cathode short-circuit triggered away.
    Low-level trigger refers to the signal voltage between the input terminal and Earth OV trigger, can be understand as the signal input terminal and the GND negative electrode short circuit triggered away 1-channel relay module connection.

    Reviews (0)

    Reviews

    There are no reviews yet.

    Be the first to review “1 Channel Relay Module For Arduino”

    Your email address will not be published. Required fields are marked *

    Shipping & Delivery
    wd-ship-1
    wd-ship-2

    MAECENAS IACULIS

    Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

    ADIPISCING CONVALLIS BULUM

    • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
    • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
    • Diam parturient dictumst parturient scelerisque nibh lectus.

    Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

    Related products

    -14%
    Compare

    Ch340 Arduino Mega 2560 With Cable In Pakistan

    ,
    Original price was: ₨ 4000.Current price is: ₨ 3450.
    The Mega 2560 is a micro-controller board base on the CH340. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything need to support the micro-controller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get start. The Mega is compatible with most shields design for the Duemilanove or Diecimila. The Mega 2560 is an update to the Mega, which it replaces. The Mega2560 differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the CH340 programmed as a USB-to-serial converter. Revision 2 of the Mega2560 board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU mode.
    Add to wishlist
    Add to cart
    Quick view
    -18%
    Compare

    Cp2102 Usb To Serial Usb To Uart Ttl Serial Module

    Original price was: ₨ 550.Current price is: ₨ 450.
    CP2102 chip from SiLabs is a single-chip USB to UART bridge IC. This cp2102 USB to serial requires minimal external components.CP2102 can be used to migrate legacy serial port based devices to USB.
    Add to wishlist
    Add to cart
    Quick view
    -16%
    Compare

    MAX6675 Module + K Type Thermocouple

    Original price was: ₨ 950.Current price is: ₨ 800.
    This temperature sensor and module makes use of the Maxim MAX6675 K-Thermocouple to digital converter IC to provide a microcontroller compatible digital serial interface (SPI compatible) to provide accurate temperature compensated measurement of the supplied K-Type thermocouple sensor. This sensor is available at electronicstore.pk shop online in Pakistan.
    Add to wishlist
    Add to cart
    Quick view
    -25%
    Compare

    Mq3 Alcohol Sensor Detector Gas Sensor Module In Pakistan

    Original price was: ₨ 400.Current price is: ₨ 300.
    MQ3 MQ 3 MQ-3 Alcohol Detector Gas Sensor Module is a simple to use MQ-3 Alcohol Detector Gas Sensor Module which can sense the presence of Alcohol in the air. The module uses our MQ-3 sensor. It simplifies the interface to the odd pin spacing of the sensor and provides an interface through standard 4 x 0.1″ header pins. It provides an analog output corresponding to the concentration of the gas in the air and an easy to use digital output. The onboard potentiometer can be used to set the maximum gas concentration beyond which the digital output gets triggered. Just power the module with 5V set the threshold and you can start getting the gas concentration of the air around the sensor! An onboard LED signals the presence of any gas. Perfect sensing alcohol concentration on your breath just likes common breathalyzer. mq3 alcohol sensor working
    Add to wishlist
    Add to cart
    Quick view
    -13%
    Compare

    Mq9 Carbon Monoxide Methane And Lpg Gas Sensor Module In Pakistan

    Original price was: ₨ 400.Current price is: ₨ 350.
    MQ-9 Carbon Monoxide, Methane and LPG Gas Sensor Module can be use to sense Carbon Monoxide and Metahane Gas. Sensitive material of MQ-9 gas sensor is SnO2, which with lower conductivity in clean air. It make detection by method of cycle high and low temperature, and detect CO when low temperature (heated by 1.5V). The sensor’s conductivity is more higher along with the gas concentration rising. When high temperature (heated by 5.0V), it detects Methane, Propane etc. combustible gas and cleans the other gases adsorbed under low temperature.
    Add to wishlist
    Add to cart
    Quick view
    -13%
    Compare

    NodeMCU Lolin V3 ESP8266 WiFi Microcontroller Module

    ,
    Original price was: ₨ 750.Current price is: ₨ 650.
    Arduino-Like Hardware IO Code like Arduino, but interactively in Lua script Event-driven API for network applications, which facilitates developers writing code Integrates GPIO, PWM, IIC, 1-Wire and ADC all in one board 10 GPIO, every GPIO can be PWM, I2C, 1-wire 4M Flash Memory Built-in WiFi Antenna
    Add to wishlist
    Add to cart
    Quick view
    -30%
    Compare

    Official Raspberry Pi Case for Raspberry Pi 5, Built-in Cooling Fan, Red/White Color

    ,
    Original price was: ₨ 4000.Current price is: ₨ 2800.
    Specification Input voltage: 5V DC supplied via four-pin fan header on Raspberry Pi 5 Fan speed control: Pulse width modulation control with tachometer Maximum airflow: 2.79 CFM Maximum fan speed: 8000 RPM +/- 15% Case material: ABS (base, frame, lid) and PC (fan assembly)
    Add to wishlist
    Add to cart
    Quick view
    -20%
    Compare

    RS485 to TTL UART Converter Module

    Original price was: ₨ 150.Current price is: ₨ 120.
    RS485 to TTL / TTL to RS485 converter is a module that allows the TTL interface of the microcontroller to be transferred to the RS485 module / MAX485 module. It is generally used for industrial automation. This module adds lightning protection design and anti-jamming design. When we use it in the field and carry out long distance transmission, we can Connect the GND end of the module to the ground so that lightning protection and anti-interference can be achieved. This Max485 to TTL module is online in Pakistan
    Add to wishlist
    Add to cart
    Quick view